6200 Series Notebook PC
Connecting the Communication Devices
Using the LAN
The RJ-45 connector of the computer allows you to connect the LAN (local
area network) devices, such as a hub, switch, and gateway, to build a network
connection. This built-in 10/100 Base-T LAN module supports data transfer
rate up to 100Mbps.
The following diagram describes the basic connection in a network
environment. For more instructions or detailed steps on connecting to the
LAN, please ask your MIS staff or network manager for help.
You are strongly recommended to install the LAN driver included
in the software CD of your computer to take full advantage of the
LAN feature.
Averatec reminds you
6 - 4
INTERNET/
INTRANET