Table of Contents
Advertisement
N
otebook User Guide
Ÿ For the power supply of this equipment, an approved power cord has
to be used.
Ÿ Make sure the socket and any extension cord(s) you use can support
Ÿ Before cleaning the computer, make sure it is disconnected from any
2.3 Starting Your Computer
The Power/Resume button is found on the top of the base unit. Press the
Power/Resume button to start your computer and check that if the Power
LED turns on.
After a few seconds, the computer's display will turn on and your computer
will begin to execute the Power On Self Test or POST to check if all system
components are running properly. Any error found during the test will be
displayed on the screen and may generate a short beep sound as well.
34
the total current load of all the connected devices.
external power supplies (i.e. AC adapter).
Advertisement
Table of Contents
