HumminGuru NOVA Owner's Manual page 11

3.
Pour in water and check the
water level based on the size of
your record.
*The water level guide
is for reference only. Optimal water
level should slightly exceed the outer
ring of the dead wax area, based on
the distance from the record's edge.
Reminder: If it is a 7" or 10" record,
insert the corresponding water basin
supports into the water basin filter slot
before placing the tool to check the
water level.
10" Water Basin Support
7" Water Basin Support
*Refer to page 13-14 for comprehensive
instructions on setup.
CAUTION
• DO NOT fill the water
tank with water to a level
exceeding 400ml.
• DO NOT bend, pull, and
twist the tool when it is
inserted in the filter slot.
Failing to do so may break
or loosen the water
basin filter.
• DO NOT allow children to
play with the maintenance
tool�
• DO NOT bend, twist, or
break the maintenance tool�
• DO NOT discard the tool
and both of the 7" and 10"
water basin supports�
8