EDIFIER STAX SPIRIT S10 Manual

Tr u e W ire l e s s P l a n ar Ma gn et ic E a rbud s w i th Active Noi s e C a nce llati on
EN 1. Power ON/OFF
Open or close the case to power on/off.
2. First pairing
Power on and then select "EDIFIER STAX SPIRIT S10" in your device
setting to connect.
3. Pairing for new device
1. In ON state, press and hold the button on the case for about 3s.
2. Select "EDIFIER STAX SPIRIT S10" in your device setting to connect.
Note: For subsequent use, the earbuds will automatically connect to
the device used last time.
4. Dual-device connection
2
1. Pair device A with the earbuds and don't take the earbuds out.
2. Re-enter Bluetooth pairing and select "EDIFIER STAX SPIRIT S10"
in device B setting to connect.
3. Select "EDIFIER STAX SPIRIT S10" in device A setting to connect
manually.
5. Reset
1. Place the earbuds in the case and keep it open.
2. Press the button on the case 3 times, white LED blinks until the
reset is complete, then the earbuds will automatically enter
Bluetooth pairing.
6. Charging
Input: 5V
Note: Please do not charge the earbuds when there is sweat or other
liquids inside the charging port, which may damage the earbuds.
7. Controls
Note:
1. Default sound control: High noise cancellation / Ambient sound /
Noise cancellation off.
2. Images are for illustrative purposes only and may differ from the
actual product.
3. "—" Press and hold.
Mo d el : E D F 20 01 37
1
x3
x1
200mA(Earbuds)
x2
x3
x1
Manual
Bluetooth
EDIFIER STAX SPIRIT S10
B
5V 1A(Charging case)
x2
x3
x1
Bluetooth
EDIFIER STAX SPIRIT S10
Bluetooth
EDIFIER STAX SPIRIT S10
A
3
Bluetooth
EDIFIER STAX SPIRIT S10
A