Denon DVD-A1UDCI Brochure & Specs page 12

22
Ease-of-Use
Control Link allowing POA-A1HDCI settings to be made via the
AVP-A1HDCI remote control unit (includes Control Link Cable: 10 ft)
With the POA-A1HDCI, it is possible to switch among XLR, RCA, and OFF
for the input signals and among Bi-Amp, NORMAL, and BRIDGE for the types of
output, for each channel. The POA-A1HDCI is also equipped with Control Link to
enable communication with the AVP-A1HDCI. When connected with a Control Link
Cable, these settings can be made using the remote control unit that comes with
the AVP-A1HDCI. (When the POA-A1HDCI is used on its own, switches on the rear
panel is used to change the settings.)
VU meters available of any channel
Other Features
RCA and XLR input for each channel
Bi-Amp / Bridge mode select
Bridged or bi-amp connections are possible by setting a switch on the rear
panel that will enable the connection of a 2-channel unit to a single-channel input.
Settings are made individually for each channel so that the front and centre chan-
nels can be bridged and the surround and back surround channels can be used
singly. During linked control from the AVP-A1HDCI, the connection method can be
selected from the AVP-A1HDCI's remote controller.
Gold plated wide pitch speaker terminal
Trigger input
RS-232C
Input / Output terminals
IN XLR EXT. 10
RCA 10
OUT Speaker A L/R out 10
Speaker B L/R out 10
Others Trigger +12 V, 250 mA 1
RS-232C 1
Control link IN 1 / OUT 1
Specifications
Power Amplifier Section
Rated output 150 W (8 ohms)
300 W (4 ohms)
300 W (8 ohms) Bridge Connection
500 W (4 ohms) Bridge Connection
General
Power supply AC 120 V, 60 Hz
Dimensions (W x H x D) 17-3/32" x 11-1/16" x 20-55/64"
434 x 281 x 530 mm
Weight 132 lbs 4 oz, 60kg
*Design and specifications are subject to change without notice.
*THX is a trademark of THX Ltd. THX may be registered in some jurisdiction. All rights reserved.
23