Download Print this page

Advertisement

Quick Links

General information
This document contains important information for the safe
use of the product. Read and follow the safety notes and all
other instructions. Keep the document for future reference. If
you pass on the product, please also include this document.
The right to make changes is reserved. Please refer to the
latest version of the documentation, which is ready for
download under www.thomann.de.
Intended use
This product serves as a workstation for studio
applications.
Any other use or use under other operating conditions is
considered to be improper and may result in personal injury
or property damage. No liability will be assumed for damages
resulting from improper use. This product may be used only
by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experien-
ce. Other persons may use this product only if they are
supervised or instructed by a person who is responsible for
their safety.
Risk of injury and choking hazard for children!
Children can suffocate on packaging material and small parts.
Children can injure themselves when handling the product.
Never allow children to play with the packaging material and
the product. Always store packaging material out of the reach
of babies and small children. Always dispose of packaging
material properly when it is not in use. Never allow children to
use the product without supervision. Keep small parts away
from children and make sure that the product does not shed
any small parts that children could play with.
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
Internet: www.thomann.de
18.09.2023, ID: 499010
Risk of injury due to the heavy weight of the product!
The product is heavy. Lifting and dropping it during transport
and installation can cause injuries. Make sure at least two
people work together when transporting and installing the
product.
Risk of cuts to the hands from sharp edges during assembly!
Tools, screws and components can have sharp edges that can
cause cuts during assembly. Pay attention to sharp edges
when assembling and screwing the individual parts. Wear
protective gloves if necessary.
Possible staining due to plasticiser in rubber feet!
The plasticiser contained in the rubber feet of this product
may react with the coating of the floor and cause permanent
dark stains after some time. If necessary, use a suitable mat
or felt slide to prevent direct contact between the device's
rubber feet and the floor.
For the packaging, environmentally friendly materials have been
chosen that can be supplied to normal recycling. Ensure that
plastic bags, packaging, etc. are properly disposed of. Do not just
dispose of these materials with your normal household waste, but
make sure that they are collected for recycling. Please follow the
notes and markings on the packaging.
ComboDesk88
Assembly Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the ComboDesk88 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for thomann ComboDesk88

  • Page 1 Risk of cuts to the hands from sharp edges during assembly! download under www.thomann.de. Tools, screws and components can have sharp edges that can cause cuts during assembly. Pay attention to sharp edges Intended use when assembling and screwing the individual parts.
  • Page 2 For reasons of safety and stability, parts number 7, 12 and 15 (3 pieces) are assembled during transport. Before you start building your Combo desk88 , turn part #7 with its underside upwards and lay it on the ground. You will see 4 screws (Type A) which hold together the three parts. Remove them and disassemble the parts carefully (keep the screws for later).
  • Page 3 STEP 2 Step 1 Push wooden dowels Type W in the appropriate holes 57 mm 77 mm 5 heights 97 mm 117 mm 137 mm Use plastic insert type I Use screws Type S Use screws Type S STEP 3 Type F...
  • Page 4 STEP 4 STEP 5 Use screws Type E STEP 6 Use screws caps Use hex wrench to screw Tighten the screw until it is even with the particle board...
  • Page 5 STEP 7 STEP 9 STEP 10 STEP 8 Use screws Type E Use screws Type E...
  • Page 6 STEP 11 STEP 12 Use screws Type E...
  • Page 7 STEP 13 STEP 14 Use screws Type A (x8) STEP 15...
  • Page 8 STEP 16 STEP 17 Use screws Type A (x4) Use screws Type D (x4)
  • Page 9 STEP 18 STEP 20 STEP 19 STEP 21 14.2 14.1...
  • Page 10 STEP 22 STEP 24 Use screws Type E 14.2 14.1 STEP 23 STEP 25...
  • Page 11 STEP 26 STEP 27 Use screws Type A (x4) Fix Rack Rail with screws Type RS...
  • Page 12: Packing List

    PACKING LIST: If you don't need the rack units don't fix the rack rails and use the pieces number 15 to close the holes Type Type Type Type Euro Screws m6x30 m6x100 Wooden dowels Type Type Type Type Rack rail Plastic insert Rack rail screws Rack units screws...

This manual is also suitable for:

499010