Download Print this page
thomann ComboDesk R-Base 568215 Assembly Manual

thomann ComboDesk R-Base 568215 Assembly Manual

Advertisement

Quick Links

General information
This document contains important information for the safe
use of the product. Read and follow the safety notes and all
other instructions. Keep the document for future reference. If
you pass on the product, please also include this document.
The right to make changes is reserved. Please refer to the
latest version of the documentation, which is ready for
download under www.thomann.de.
Intended use
This product serves as a workstation for studio
applications.
Any other use or use under other operating conditions is
considered to be improper and may result in personal injury
or property damage. No liability will be assumed for damages
resulting from improper use. This product may be used only
by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experien-
ce. Other persons may use this product only if they are
supervised or instructed by a person who is responsible for
their safety.
Risk of injury and choking hazard for children!
Children can suffocate on packaging material and small parts.
Children can injure themselves when handling the product.
Never allow children to play with the packaging material and
the product. Always store packaging material out of the reach
of babies and small children. Always dispose of packaging
material properly when it is not in use. Never allow children to
use the product without supervision. Keep small parts away
from children and make sure that the product does not shed
any small parts that children could play with.
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
Internet: www.thomann.de
18.09.2023, ID: 568215
Risk of injury due to the heavy weight of the product!
The product is heavy. Lifting and dropping it during transport
and installation can cause injuries. Make sure at least two
people work together when transporting and installing the
product.
Risk of cuts to the hands from sharp edges during assembly!
Tools, screws and components can have sharp edges that can
cause cuts during assembly. Pay attention to sharp edges
when assembling and screwing the individual parts. Wear
protective gloves if necessary.
Possible staining due to plasticiser in rubber feet!
The plasticiser contained in the rubber feet of this product
may react with the coating of the floor and cause permanent
dark stains after some time. If necessary, use a suitable mat
or felt slide to prevent direct contact between the device's
rubber feet and the floor.
For the packaging, environmentally friendly materials have been
chosen that can be supplied to normal recycling. Ensure that
plastic bags, packaging, etc. are properly disposed of. Do not just
dispose of these materials with your normal household waste, but
make sure that they are collected for recycling. Please follow the
notes and markings on the packaging.
ComboDesk R-Base
Assembly Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the ComboDesk R-Base 568215 and is the answer not in the manual?

Questions and answers

Summary of Contents for thomann ComboDesk R-Base 568215

  • Page 1 Risk of cuts to the hands from sharp edges during assembly! download under www.thomann.de. Tools, screws and components can have sharp edges that can cause cuts during assembly. Pay attention to sharp edges Intended use when assembling and screwing the individual parts.
  • Page 2 Left Slider 1 (L) Slider 2 (L)
  • Page 3 STEP 1 90 mm 4 heights FIX SLIDER 1 (L+R) 110 mm 130 mm 150 mm Left Use plastic insert type I Fix Slider 1 (L+R) Slider 1 (L) Slider 2 (L) Use screws Type S...
  • Page 4 STEP 2 STEP 3 Use screws Type E Push wooden dowels type W in the appropriate holes Type F...
  • Page 5 STEP 4 STEP 5 Use screws Type E Use Assembly Kit In each hole in the second piece, put Ensure that the hole in the bolt On the piece with the threaded in a cone shaped safety screw and insert(s) , put in the system bolt(s) aligns with the opening in the tighten with a cross screw driver - and tighten making sure to align the...
  • Page 6 STEP 6 STEP 7 STEP 8 Use screws Type A (m6x30) Type Rs Type Rb Type Rs...
  • Page 7 STEP 9 STEP 11 Fix Sliders 2 (L+R) with type s30 STEP 10 Use screws Type E...
  • Page 8: Packing List

    STEP 12 PACKING LIST: Type Type Type Euro Screws Assembly Kits Wooden dowels Plastic insert Type Type Type Type m6x30 Rack rail screws Rack units screws Rack bolt screws Type Type Type Type 3.5x30 Rack rail 2 U 3.5x16 Slider 300 mm Type Type Plastic foot...