Page 1
Installing the 3-Inch Side Panel Kit (Model ER30DSRSCH) For self-rimming installations with non-standard countertop depths, installation of the optional side panel kit may be necessary to cover the sides of the range that protrude from the cabinet. To install the side panel kit: STEP 1: Open the oven door.
Page 2
STEP 2: Close the door. Remove and retain the two screws from the back of the kick panel as shown below. Pull the kick panel free from the front of the unit. STEP 3: Remove the left end cap retaining screw from under the rim of the control panel and re- move the end cap.
Page 3
Use the hex head screw (80) removed from the side, a Torx head screw removed from the kick panel and the hex screws from the kit to attach the side panel to the range. Three () hex head screws attach the side. One (1) Torx head screw (8709) inserts through the end cap hole to attach the top of the side panel.