1. Manuals
  2. Brands
  3. Mega LED Lighting Manuals
  4. Lighting Equipment
  5. MJ-1011
  6. Instruction manual

Mega LED Lighting MJ-1011 Instruction Manual

37 xpe led beam moving head
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
37 XPE LED BEAM MOVING HEAD
MJ-1011
INSTRUCTION MANUAL
Thank you for choosing our LED beam moving head light. For the sake of your safety, Please
read and follow these instructions carefully and keep this manual in a safe place for future
reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MJ-1011 and is the answer not in the manual?

Questions and answers

Related Manuals for Mega LED Lighting MJ-1011

Summary of Contents for Mega LED Lighting MJ-1011

  • Page 1 37 XPE LED BEAM MOVING HEAD MJ-1011 INSTRUCTION MANUAL Thank you for choosing our LED beam moving head light. For the sake of your safety, Please read and follow these instructions carefully and keep this manual in a safe place for future...

  • Page 2: Table Of Contents

    LED Beam Moving Head 373 MJ-1011 User Manual ver2.0 Catalogue Chapter Page Safe Usage Of The Product -----------------------------------------------------------------------------------------3 Install The Equipment ------------------------------------------------------------------------------------------------4 Power Code Connection ---------------------------------------------------------------------------------------------4 DMX Connection ------------------------------------------------------------------------------------------------------5 DMX Terminator -------------------------------------------------------------------------------------------------------5 Function Set --------------------------------------------------------------------------------------------------------------6 Operation Menu ---------------------------------------------------------------------------------------------------------6 Control Panel Of LED Display Information...

  • Page 3: Safe Usage Of The Product

    LED Beam Moving Head 373 MJ-1011 User Manual ver2.0 SAFE USAGE OF THE PRODUCT When unpacking and before disposing of the carton, check there is no transportation damage before using the product. Should there be any damage caused by transportation, consult your dealer and do not use the apparatus.

  • Page 4: Install The Equipment

    LED Beam Moving Head 373 MJ-1011 User Manual ver2.0 Install The Equipment: Use 1pcs clamp and safety cord(need to purchase).Use clamp fix with light hook which in the packing box with light, then use screw install to the bottom of lamp. Hang the fixture on the structure and fasten the screws attached to each clamp.

  • Page 5: Dmx Connection

    LED Beam Moving Head 373 MJ-1011 User Manual ver2.0 DMX Connection: Connection between the controller and a projector and between one projector and another must be made with a 2 core-screened cable, with each core having at least a 0.5mm diameter. Connection to and from the projector is via cannon 3 pin (which are included with the projector) XLR plugs and sockets.

  • Page 6: Function Set

    LED Beam Moving Head 373 MJ-1011 User Manual ver2.0 The DMX terminator is simply an XLR connector with a 120Ω (ohm) resistor connected across pins 2 and 3, which is then plugged into the output socket on the last projector in the chain. The connections are illustrated below.
  • Page 7 LED Beam Moving Head 373 MJ-1011 User Manual ver2.0 DMX512：Controlled by the DMX controller Auto1： Built-in programs 1 Auto2： Built-in programs 2 Sound: Sound control (sensitivity adjusted by GENERAL->SOUND) Custom： Execute user programs .Programs need to edit in the EDID->PROGRAM Slave: Slave mode.
  • Page 8 LED Beam Moving Head 373 MJ-1011 User Manual ver2.0 Sla.Auto ：ON / OFF slave automatic testing function. ON：When this light under the DMX 512 mode（RUN->DMX512）,if test master light signal, then it can enter slave mode automatic, do not need to operation iton the panel of （RUN->Slave）.

  • Page 9: Control Panel Of Led Display Information

    LED Beam Moving Head 373 MJ-1011 User Manual ver2.0 EDIT CHANNELS STROBE CH01 DIMMER CH02 PAN.F TILT CH12 TILT.F Off=255 CONTRO Off=000 L C.MACRO GREEN BLUE SPEED 0-255 COLOR M.Color1 EDIT Green M.Color2 0-255 M.Color3 Blue 0-255 M.Color1：Determine the color of 191-200 in 8 channel.

  • Page 10: Trouble Shooting

    LED Beam Moving Head 373 MJ-1011 User Manual ver2.0 light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoke or particularly dirty surroundings can cause greater accumulation of dirt on the unit's optics. A soft cloth and typical glass cleaning products should be used for cleaning.
  • Page 11 LED Beam Moving Head 373 MJ-1011 User Manual ver2.0 C ontrol ( If the 0-19 N o function panel menu 20-39 PAN/TILT Black Activated allows,after 3s 40-59 PAN/TILT Deactivated delayed will 60-79 FAN Auto (1) activation function, 80-99 FAN Slow (1)
  • Page 12 LED Beam Moving Head 373 MJ-1011 User Manual ver2.0 12CH MODE Channel Function Function Description Value 0-255 Pan movement Pan Fine 0-255 Pan Fine Tilt 0-255 Tilt movement Tilt Fine 0-255 T ilt Fine Speed 0-255 Pan/Tilt speed Dimmer 0-255...

  • Page 13: Technical Parameters

    LED Beam Moving Head 373 MJ-1011 User Manual ver2.0 Technical Parameters: Construction: Composite plastic, die-casting aluminum, Voltage: AC90V-240V; 50/60Hz Power Consumption: 148W (220V) LED Bulbs: CREE XPE 3W*37LEDs(Red:13;Green12;Blue:12) LED Current: 750mA LED Lifetime: 50000Hours Colors: RGB color mixing Adjusts the light: 0-100 electron adjusts the light, various colors may alone move also may mix the...

Table of Contents