Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Mega LED Lighting MJ-1006
Summary of Contents for Mega LED Lighting MJ-1006
- Page 1 LED MOVING HEAD 108 MJ-1006 User Manual PROFESSIONAL LED LIGHTING ====== ======== Thank you for choosing our LED moving head light. For the sake of your safety, Please read and follow these instructions carefully and keep this manual in a safe place for future...
-
Page 2: Table Of Contents
Catalogue Chapter Page Safe Usage Of The Product -----------------------------------------------------------------------------------------3 Install The Equipment ------------------------------------------------------------------------------------------------4 Power Code Connection ---------------------------------------------------------------------------------------------4 DMX Connection ------------------------------------------------------------------------------------------------------5 DMX Terminator -------------------------------------------------------------------------------------------------------6 Function Set --------------------------------------------------------------------------------------------------------------6 Operation Menu ---------------------------------------------------------------------------------------------------------7 Maintenance --------------------------------------------------------------------------------------------------------------9 Keeping The Product Clean -----------------------------------------------------------------------------------------10 Trouble Shooting --------------------------------------------------------------------------------------------------------10 Equipment and Appendix ----------------------------------------------------------------------------------------------10 Channel List ----------------------------------------------------------------------------------------------------------------11... -
Page 3: Safe Usage Of The Product
SAFE USAGE OF THE PRODUCT When unpacking and before disposing of the carton, check there is no transportation damage before using the product. Should there be any damage caused by transportation, consult your dealer and do not use the apparatus. The product is for indoor use only, IP20. -
Page 4: Install The Equipment
Install The Equipment: Use 1pcs clamp and safety cord(need to purchase).Use clamp fix with light hook which in the packing box with light, then use screw install to the bottom of lamp. Hang the fixture on the structure and fasten the screws attached to each clamp. Make sure the light is installed reliable, and confirm the light which you fixed is strong enough for hanging the light. -
Page 5: Dmx Connection
DMX Connection: Connection between the controller and a projector and between one projector and another must be made with a 2 core-screened cable, with each core having at least a 0.5mm diameter. Connection to and from the projector is via cannon 3 pin (which are included with the projector) XLR plugs and sockets. -
Page 6: Dmx Terminator
DMX Terminator: In the Controller mode, at the last fixture in the chain, the DMX output has to be connected with a DMX terminator. This prevents electrical noise from disturbing and corrupting the DMX control signals. The DMX terminator is simply an XLR connector with a 120Ω (ohm) resistor connected across pins 2 and 3, which is then plugged into the output socket on the last projector in the chain. -
Page 7: Operation Menu
Operation Menu: DMX Addr set DMX Address 001-512 Config Set Channel Set Standard Extended Short Fan Set AUTO speed High speed Temperature Set 70-110℃ Option Set Pan Invert Pan swap off Pan swap off Tilt Invert Tilt swap off Tilt swap on Dimmer Invert Dimmer swap off Dimmer swap on... - Page 8 Master show Work Modes Demo Modes 1 Master Running Demo Modes 2 Sound Running Sound Mode Slave Running Slave Mode DMX512 Mode DMX512 Mode Information Power On Hours **** hour Power this time **** minute Head ensor Software version YL-1080.1 Reset To Factory Mode Sytem Reset...
-
Page 9: Maintenance
2. Show Pan invert , Choose menu by pressing ”UP&DWON” button, will show pan swap . correcting by “ENTER” Button. 3. Show Tilt invert , Choose menu by pressing ”UP&DWON” button, will show tilt Swap and tilt DMX swap.. correcting by “ENTER” Button. 4. -
Page 10: Keeping The Product Clean
Keeping The Product Clean: To ensure the reliability of the projector, it should be kept clean. It is recommended that the fans should be cleaned every 15 days. LED lens should also be regularly cleaned to maintain an optimum light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoke or particularly dirty surroundings can cause greater accumulation of dirt on the unit's optics. -
Page 11: Channel List
Channel List: Short Standard Extended Function Effect mode mode mode Value ---- Main dimming 0-255 R dimming 0-255 G dimming 0-255 B dimming 0-255 W dimming 0-255 0-10 No strobe Strobe 10-255 Strobe speed 0-32 Standard white strobe R bottom color strobe RG bottom color strobe G bottom color strobe ----... -
Page 12: Technical Parameters
Technical Parameters: Construction: Composite plastic, die-casting aluminum, Voltage: AC90V-240V; 50/60Hz Power Consumption: 360W @(220V) LED Bulbs: 3W*108LEDs(Red:30pcs;Green:30pcs;Blue:30pcs;White:18pcs) LED Current: 750mA LED Lifetime: 50000Hours Colors: RGBW color mixing Adjusts the light: 0-100 electron adjusts the light, various colors may alone move also may mix the color tone Strobe: 1-25/second high speed strobe, but single color Mixes the color strobe Head Movement: Pan 540°, Tilt 270°, with auto position correction and electronic replacement...
Need help?
Do you have a question about the MJ-1006 and is the answer not in the manual?
Questions and answers