Receiving A Phone Call - Motorola 6700 User Manual

Receiving a Phone Call

To receive a phone call:
• Your phone must be switched on and unlocked.
• You must be in an area where there is GSM service.
• Your Call Diversion and Call Barring settings should not be set
to divert or bar incoming calls.
When your phone receives a call, it will ring and the display will
show the message (if you have Caller Line Identification,
Call
the caller's name or number will be displayed instead).
To answer the call, press O. If the signal strength is weak
then extend your antenna.
If you do not wish to answer a call you can either:
Press and release the C key. If you have enabled the
'Detailed Diverting - If Busy' option in the Options Menu, the
caller will be diverted to the forwarding number, otherwise
the caller will hear the busy tone.
or
Press and hold the C key. This will reject the incoming call.
No call divert option will be offered.
If your phone rings and you do not answer it, the message
will be displayed to show you that a call
Unanswered Call
attempt was received.
Ending a Phone Call
To end a phone call, press O.
Making and Receiving Phone Calls
English
21