Page 2
Recommended Tools Phillips Screwdriver Adjustable Wrench Teflon Tape Regular Screwdriver Channel Locks Tubing Cutter INSTALL LAVATORY ROUGHING-IN DIMENSIONS Turn off hot and cold water CAUTION FAUCET supplies before beginning. Seat O-RING (1) into under side of FAUCET BASE (2). 7-7/8" (201mm) Feed FAUCET SUPPLIES (10) and SPRAY HOSE (11) through the mounting hole and install the FAUCET (3) into the sink or counter...
Page 3
WATER SUPPLY CONNECTIONS Note: FLEXIBLE HOSES (1, 2) on FAUCET (3) are 18-1/2" (470mm) in length from base of faucet. If longer supply length is required installer must purchase adapters and additional supplies to complete connections. Important: If SUPPLY HOSES (1, 2) are to long, loop as illustrated to avoid kinking.
Page 4
JADO will not be liable for labor or other costs relating to the sale, installation, or replacement of their products. In the event of a defect in any JADO product covered by this warranty, the product must be returned to the dealer where originally purchased JADO BATHROOM AND HARDWARE MFG.
Need help?
Do you have a question about the Glance 831 and is the answer not in the manual?
Questions and answers