Table of Contents
Advertisement
Technical Terminology
•
Refrigerant
Liquids that can be used to a generate a cooling
effect are known as refrigerants. They have a rela-
tively low boiling-point, indeed so low, that the
warmth from the food stored in the fridge or
freezer can cause the refrigerant to boil and
vaporise.
•
Refrigerant Circuit
Closed circulation system that contains the refrig-
erant. The refrigerant circuit comprises primarily
of an evaporator, a compressor, a condenser and
pipe work.
•
Evaporator
The refrigerant is evaporated in the evaporator.
Similar to all other liquids, refrigerant requires
heat to evaporate. This heat is removed from the
interior of the appliance, as a result the interior is
cooled. The evaporator is therefore located inside
the appliance or placed in foam immediately
behind the inner wall and thus not visible.
Customer Service
If you cannot find the remedy for a malfunction in
these operating instructions, please contact your
dealer
or
our
customer
Addresses and telephone numbers are listed in the
•Model Name
•Model Number (PNC)
•Serial Number (S-No.)
This information can be found on the rating plate in
the interior at the left of the appliance. We recom-
mend that you enter this information here, so that it is
handy if needed.
Note: The customer bears the costs of unjustified
customer service calls even during the guarantee
period.
36
service
department.
•
Compressor
The compressor looks like a small drum. It is
driven by a built-in electric motor and is mounted
on the base of the appliance at the rear. The task
of the compressor is to draw in vaporised refriger-
ant from the evaporator, to compress it, and to
pass it on to the condenser.
•
Condenser
The condenser normally has the form of a grid.
The refrigerant compressed in the compressor is
liquefied in the condenser. During this process,
heat is released to the surrounding air at the sur-
face of the condenser. The condenser is mounted
on the base of the appliance.
accompanying booklet "Guarantee Conditions/Cus-
tomer Service Locations".
Selective ordering of replacement parts can save
unnecessary travel and costs. For this reason always
provide the following appliance information:
Advertisement
Table of Contents
