(suction) type. To install the filter, proceed as follow: — The best performances are obtained with fit the filter into its seat B and fix with the two short pipes (max. 4 m) and with few hooks C (fig. 3).
Fit the shim F to the left and to the right of the least once every30 days. fixing curves of the hood and hook them in Before refitting the filter ensure that it is the holes.
Page 6
— Before calling for Repair Service because the hood fails to light up, make sure the lamp is well-inserted. Cleaning To clean the outside of the hood use a cloth moistened with denatured alcohol or neutral liquid detergents. Never use products containing abrasive.
Need help?
Do you have a question about the JDA5330W and is the answer not in the manual?
Questions and answers