View of the hood Installation 1) Motor speed switch When installed, the hood must be not less 2) Light switch than 65 cm. above electric burners or 75 3) Extractable drawer cm. above gas or mixed-fuel burners. 4) Grid 5) Cooking surface lighting Warning! —...
Electric connection Only for JDA 5230 Before completing any connection, make Replacing the plastic front sure the house voltage corresponds with The hood is supplied with a brown plastic the voltage indicated on the label affixed front which can replace the white one already inside the hood.
Replacing the lamp Maintenance a. Disconnect the hood from the electricity. Before performing any maintenance b. Pull-out the extractable drawer. operation, disconnect the hood from the c. Remove the inlet grid. electricity. d. Always replace burnout bulbs with olive- shaped max 40 Watt (E14) bulbs. Metal grease filter e.
Need help?
Do you have a question about the JDA 5130 and is the answer not in the manual?
Questions and answers