Page 1
JASPER USER MANUAL Please read SAFETY INSTRUCTIONS carefully before using the chair.
Page 2
Jasper Massage Chair Congratulations and thank you for trusting RELAXONCHAIR. You are about to discover the many joys of owning a premium RELAXONCHAIR ™ Jasper Massage Chair. Massage, combined with healthy eating, exercise and a good sleep regiment, is a great way to take care of your body &...
Before you start using your RELAXONCHAIR™ Jasper Massage Chair, please read this operation manual thoroughly to learn about the correct methods of usage, especially the section on safety. This manual should be kept on hand for easy reference. It is your guide to safe and e cient operation.
SAFETY PRECAUTIONS Must followed Listed below are safety matters that must be strictly observed in order to prevent personal and property damage during use. All safety matters will be explained according to the degree of harm or damage caused by misuse. Warning Please pay attention to the symbols before each safety item.
Page 5
SAFETY PRECAUTIONS Warning Even if the following people are in good health, please consult a physician before using this machine. (1) People with muscle atrophy or lean body due to aging (2) People who have low back pain due to bone or internal organ problems (3) People who are prone to sprains or bruises (4) People who react abnormally when they are motion sick (5) People who have had heart surgery or other visceral surgery in the past...
Page 6
SAFETY PRECAUTIONS Warning When using a "warm" massage wheel, do not allow the massage wheel to touch the same position for a long time. Do not use the "Knee Warm" massage for a long time. Low temperature burns may occur. Even if the temperature is relatively low (40 °...
Page 7
SAFETY PRECAUTIONS Caution Do not use the unit in a bathroom or other humid place. Failure to do so may cause electric shock or physical disturbance. Do not touch with wet hands Do not spray water or other substances on the unit or remote control. Otherwise it may cause electric shock, short circuit or cause the machine to malfunction.
PRODUCT INFORMATION Voltage Model JASPER 110V / 50Hz-60Hz 140W 10, 20, 30 mins Power Timer 185 lbs 220 lbs N.W. G.W. Product Size 56 (L) x 29.5 (W) x 46 (H) in Carton Size 70 (L) x 30.5 (W) x 35 (H) in...
PRODUCT SETTING Check Environment Make sure there is enough space for the massage chair to tilt. Do not expose the massage chair to direct sunlight or high temperatures (eg, in front of a heating device) as this may cause the synthetic leather of the massage chair to fade or harden. To avoid floor damage, place a mat under the machine.
Page 11
PRODUCT SETTING Product Movement Instructions Method 2: Use the slider to move the machine Place the remote control and power cord in your seat. Caution Push the massage chair as right picture, but this method is not suitable for wooden floor push, otherwise it may leave scratches on the wooden floor.
PREPARATION BEFORE USE Check Around Make sure there are no people, pets, or other objects around the product. Roll Up the Pillow Pad and Fasten It With a Zipper pillow pad pillow pad The pillow pad is rolled up and secured to the body with a zipper.
Page 13
PREPARATION BEFORE USE Check the Power Cord and Power Plug Caution Please clean the dust on the power plug regularly. Failure to do so may result in poor insulation due to moisture, etc., resulting in a fire. Be careful not to get caught on (Please wipe the power plug with a dry cloth.) the feet, etc.
Page 14
PREPARATION BEFORE USE Confirm That the Massage Ball Is in the Storage Position When the massage ball is not in the storage position,press the power button to return to the Confirm storage position. Confirm That the Fabric and leather is not damaged or cracked Check area: Check area: confirm...
Page 15
PREPARATION BEFORE USE Adjust Chairs As Required Adjust back pad angle Adjustable backrest angle. When it is necessary to adjust the backrest to the comfortable position, use the remote control to adjust. Adjust Foot Massage Length As Required For tall people Pressing the heel hard can lengthen the foot massage, and the knee is not easy to hang.
MANUAL CONTROL Remote Controller Switch Shoulders upward On/Off Pause Shoulders downward Pause Down Backrest Up Calf Down Calf Up Down Zero Zero Gravity Backrest Down Auto Massage technique Auto Massage mode Backrest Massage Speed Time Back Time Speed Amplitude Adjustment Air Pressure Mode Foot Roller Level...
Page 17
MANUAL CONTROL Power Press Power button to start the massage session. By default, it is set to start Auto Mode 1. Press Power button at anytime to turn off the massage chair and end the massage sesson. Pause Button Press Pause button at anytime to pause massage session. Press Pause button again to resume massage session.
Page 18
Press this button to cycle through the various combinations of leg airbags, backrest cushions and shoulder airbags, arm airbags. Air Pressure Intensity Press this button to select the first, second and third air pressure intensity. How to connect bluetooth From your phone, search for device name called [JASPER] and connect to your phone.
ARMREST SHORTCUT KEYS Switch Knob Press and hold to switch on/off ( on: blue light flashes slowly; off: blue light turns off ) Tap this key: Cycle through modes ( mode 1, mode 2, mode 3 - ) When the calf light is off -Turn the knob clockwise to move the backrest upwords -Turn the knob counterclockwise to move the...
AFTER MASSAGE Turn the foot massage to the original position. Remove your foot from the calf and foot massage. To ensure safety, please be sure to move your calf after use. Retraction method of calf foot massage part Make sure there is nothing in the calf. Slowly remove the legs from the calf leg massage.
Page 21
AFTER MASSAGE Cut off the power. 1.“trun off”power switch 3. Unplug the 2. Unplug the body power plug power plug About the timer function When massage function stop Press button The timing function is activated after the massage starts, and will Calf, foot massage automatically drops,massage round back to the recovery position.
CLEANING AND MAINTENANCE Cleaning synthetic leather parts Wipe the leather with a soft, dry cloth. Do not clean the machine with chemicals such as diluent, gasoline or alcohol. When using the leather maintenance products (rags) on the market, please follow the instructions. If the synthetic leather is particularly dirty, wipe it with the following methods.
PROBLEMS AND TROUBLESHOOTING Can the product be used by people who Where can I find the manufacturing often go to the hospital because of illness? number of the product? People who often go to the hospital, please consult with Under the seat surface on the back of the main body of the doctor before using this product.
Page 24
PROBLEMS AND TROUBLESHOOTING After finding the fault, first check and try the method If the fault persists after the attempt, please contact the store. Cause and Treatment Problems During use, when the massage wheel encounters excessive external The massage wheel stops during force, the massage wheel may stop moving for safety reasons.
QUESTIONS AND ANSWERS About the sound and caring feeling of the machine during operation In the process of using, the following movement sounds will occur, but this is due to the structure of the massage chair, not abnormal When the massage wheel sound from out to back. The sound and feel of the massage wheel as it passes over wrinkles in the fabric.
SPECIFICATIONS AC110V~, 50Hz~60Hz Power 140W Consumption of electricity (It's about 0.3w when you turn it off with the remote control) Massage range About 57in (upper and lower directions) The distance between massage wheels when using this machine (includes the width of massage wheels) Massage range The distance between the massage wheels during back (left and right...
WARRANTY RELAXONCHAIR Limited Three (3) Year Warranty RELAXONCHAIR warrants to the original purchaser of this product that the product will be free from manufacturing defects in workmanship and material for a period of three (3) years from original date of purchase with following coverage.
Need help?
Do you have a question about the JASPER and is the answer not in the manual?
Questions and answers