Related Manuals for RELAXONCHAIR YUKON-4D
Summary of Contents for RELAXONCHAIR YUKON-4D
- Page 1 YUKON-4D USER MANUAL Please read SAFETY INSTRUCTIONS carefully before using the chair.
- Page 2 YUKON - 4D Function Introduction 1. With the addition of patented 4D massage design built into the roller mechanism, the massage chair is able to deliver a powerful, creative massage that utilizes techniques such as kneading, tapping, a combination of kneading and tapping, shiatsu, knocking, and rolling in order to imitate human hands along your body.
-
Page 3: Table Of Contents
Thank you for choosing the Relaxonchair Yukon Massage Chair. Please read this manual very carefully before use of the product. Keep this manual for future reference. Please pay attention to the SAFETY INSTRUCTIONS. Note: We reserve the right for the design to be changed. It is subject to change without notice. - Page 4 SAFETY INSTRUCTIONS � Please read this manual carefully to ensure that the installation and operation of the massage chair is correct. � Warning and Caution markings are provided for important safety information. Warning This sign indicates possible cause of death or severe injury to the body. Caution This sign indicates possible injury or damage to things.
- Page 5 SAFETY INSTRUCTIONS Warning ● Before sitting, please confirm that there are no foreign matter inclusions between the various parts of the machine. ● When using the backrest ， calf up &down, or calf extend, be sure to check that there are no people or objects in the area (behind, under, or in front of the chair).
- Page 6 SAFETY INSTRUCTIONS Caution To avoid sudden falling. ● Please operate the chair in a flat or level place. ● The maximum suggested operating time is 20mins. 5mins for each Too long time massage position beginning with the slight- step massage. Along continuous is bad for your body.
-
Page 7: Safety Instructions
SAFETY INSTRUCTIONS Caution ● Keep the chair away from heat, wet, sharp things and corrosive, inflammable, explosive environment. ● To use electric blanket or other heating products on the chair is forbiden. To avoid fade, discolor ● Keep the chair away from stove or other heating products. on upholstery or ●... -
Page 8: External Structure Parts
EXTERNAL STRUCTURE PARTS Right shoulder massage device Loud speaker Head pad Left shoulder massage device Shoulder cushion Back seat cushion Right armrest USB charging port Left armrest Seat Legrest Castor Footrest On Off Heating Pause Experience Menu Auto Remote control pocket Backrest Zero Power switch... -
Page 9: Internal Structure Parts
INTERNAL STRUCTURE PARTS Heating Massage head Shoulder airbag Waist airbag Air bags in the arm area Air bags in the side seat Side airbag of leg Calf airbag Footrest airbag Foot heating plate Foot roller and shiatsu... - Page 10 MECHANICAL COMPONENTS MECHANICAL COMPONENTS DIAGRAM...
-
Page 11: Mechanical Components
MECHANICAL COMPONENTS MECHANICAL COMPONENTS LIST Name Name Remote control Left amrest assembly Left armrest frame Right armrest assembly assembly Footrest electric actuator Massage machine Seat frame surface Power case assembly assembly Seat bottom frame Left side fender assembly Right armrest frame Pillow assembly Under frame assembly... -
Page 12: Installation
INSTALLATION STEP 1: PREPARING ASSEMBLY � Check the Boxes Check all the boxes to make sure that you have everything you need. Make sure that the chair is reclined and is away from objects and obstructions for safe assembly. BOX 1 (MAIN CARTON BOX): MASSAGE CHAIR MAIN BODY & 2 ACCESSORY BOXES Accessories from the accessory boxes Massage chair main body... -
Page 13: Installation
INSTALLATION STEP 2: INSTALLING THE FOOTREST � Preparing to Install the Footrest Locate the body of the chair on a soft surface in order to begin assembly. Identify the location of the footrest screws and attachments on the body of the chair. Using a Phillips-head screwdriver, remove the footrest screws and put aside for later. - Page 14 INSTALLATION STEP 3: INSTALLING THE ARMRESTS � Preparing to Install the Armrests Locate the left-side air hoses on the body of the chair that will be connected to the left-side arm panel. Locate the right-side air hoses and electrical plug on the body of the chair that will be connected to the right-side arm panel.
- Page 15 INSTALLATION 6. Tighten the screw fully in order to 5. Then align the panel with the body of secure the armrest to the chair. Once the chair in order to slide the arm panel fully screwed in, plug the hole with the into the slots.
- Page 16 STEP 5: PLUG AND PLAY Power cable can be plugged into the back of the chair and the power can be turned on by flipping the power switch on. You can now enjoy your RELAXONCHAIR Yukon-4D Massage Chair. Note: Please refer to the user manual for instructions on how to operate the massage chair.
-
Page 17: Adjustments Before Massaging
ADJUSTMENTS BEFORE MASSAGING CHECK ENVIRONMENT ● Don’t operate the chair in wet environments in order to avoid leakage or electric shock. ● Don’t operate under direct sunlight or near heating sources in order to avoid upholstery deterioration. ● Please operate the chair on a flat surface in order to avoid falling, injuries, unnecessary Caution noise, etc. - Page 18 ADJUSTMENTS BEFORE MASSAGING HOW TO MOVE MASSAGE CHAIR Caution ● Don’t move the chair while it is in operation in order to prevent accidents or damages. � Preparing to Move - Bind the cables and put them in the seat to avoid damage when moving. - Do not use the roller on the back of the chair if the flooring can be easily damaged or ruined.
- Page 19 ADJUSTMENTS BEFORE MASSAGING MASSAGE ADJUSTMENT � Massage Adjustment Make sure the back rollers stop at the upper portion of the back, then proceed to sit on the chair slowly. When the massage chair cannot find the shoulders during body scans, it will default to the middle of the back portion.
- Page 20 MANUAL CONTROL Time+ Speed: 20 min Width: Intensity: 4D： Time- Zero Set function by pressing Menu key. On Off Heating Pause On/Off Pause Heat Auto Menu Experience Menu Auto Experience Legrest up and backrest down Legrest up Legrest down Zero-Gravity Zero Left Right...
-
Page 21: Manual Control
MANUAL CONTROL 1. The ON/OFF button powers the chair ON and OFF. While the chair is in any position and On/Off OFF, the ON/OFF button turns the chair ON, and leaves the chair in the same position. The massage chair is then able to be operated. Once finished, while the chair is ON, the ON/OFF button will turn off the chair and return the chair to an upright position. - Page 22 MANUAL CONTROL LCD DISPLAY GRAPHIC DESCRIPTION � Main Interface Pressing the “on/off” button when the power switch is flipped on at the back of the massage chair will power on the chair and the display on the remote control will light up after 2-3 seconds.
- Page 23 MANUAL CONTROL Manual Mode: Press the MENU button, and select the manual option using the directional keys. There are 6 options: “Mode”, “Position”, “Width”, “Speed”, “4D”, and “Footrest”. You can choose the corresponding options with the OK button. Mode has 5 options: “Kneading”, “Tapping”, “Knocking”, “Kneading &...
- Page 24 MANUAL CONTROL Heating: Timer: Press the MENU button, and navigate towards Navigate the menu to the “timer” option. The the “heating” option. The “Back” and “Foot” time can be adjusted to intervals of 10 options can be toggled ON/OFF, which heats minutes.
-
Page 25: Operation Instruction
OPERATION INSTRUCTION ON/OFF � Step 1. Power On 1. Put one end of the power cable to the massage chair. 2. Put the power cable into the socket. 3. Proceed to turn on the power switch located at the back of the massage chair. 4. - Page 26 FUNCTION ILLUSTRATION � Footrest Up � Footrest Down Press and hold this button on the controller Press and hold this button on the controller to lift up the footrest. Releasing the button to lower the footrest. Releasing the button stops moving the footrest, and locks the stops moving the footrest, and locks the position of the forest.
-
Page 27: Function Illustrations
FUNCTION ILLUSTRATION � Extending and Retracting the � Arm Massage Footrest The massage chair uses a capsule type armrest with a built-in air pressure The footrest can extend and retract within massage function. Put the arms in between 8.7 inches automatically. the armrest’s airbags. -
Page 28: Voice Recognition
VOICE RECOGNITION 4D VOICE RECOGNITION COMMAND � To Turn On Voice Command Say ‘Turn on speech recognition mode’. * If your voice command is recognized, the speaker will respond after 1 second. � Commands You may now give your chair any of the commands below within 30 seconds. Make sure to speak clearly and slowly. -
Page 29: After Massage
AFTER MASSAGE RESTORATION OF MASSAGE CHAIR 1. Make sure that there is nothing 2. The backrest and footrest can be within the vicinity of the chair’s restored to the upright position by backrest and footrest. pressing the ON/OFF button on the chair to turn off the power. -
Page 30: Cleaning And Maintenance
CLEAN AND MAINTENANCE SYNTHETIC & GENUINE LEATHER (SITTING AREA) � General Cleaning Clean with tidy, soft, and dry cloth slightly. Note: Do not use thinner, gasoline, alcohol or other chemicals. � If the leather is dirty 1. Dip the soft cloth into a 3-5% neutral detergent solution, wring out most of the liquid, then clean the stain on the surface very gently. - Page 31 MALFUNCTION GUIDE FAQ AND TROUBLESHOOTING Trouble Possible reason Troubleshooting Check if the control is on or not. Open control switch Not choose massage function Choose massage function Check whether the plug and socket Make sure plug and socket are connected. in poor contact.
-
Page 32: Technical Data
TECHNICAL DATA TECHNICAL DATA Name Power Massage Chair 260W Main body: 236/283 lbs Model Yukon - 4D Armrest: 38/48 lbs NW/GW Legrest &footrest: 70/78 lbs Input voltage □ AC120V, 60Hz Main body: 62×32×38 in Armrest: 40×16×30 in Packing size Legrest &footrest: 23×22×24 in （L×W×H) Safety design Class I...
Need help?
Do you have a question about the YUKON-4D and is the answer not in the manual?
Questions and answers