EC-U2SA / USER MANUAL Product Introduction FEATURES • Tool-free installation • Supports U.2 (SFF-8639) PCIe SSD, 2.5” & 3.5” SATA SSD/HDD • Transfer speeds up to 10Gbps via USB 3.2 Gen 2 • Broad compatibility, including TRIM and UASP support •...
EC-U2SA / USER MANUAL DRIVE INSTALLATION As shown above, carefully connect the SSD or HDD to the SATA/U.2 adapter connector...
Page 6
EC-U2SA / USER MANUAL Connect the power adapter to the device and then insert the power adapter into an available power outlet...
Page 7
EC-U2SA / USER MANUAL Connect the USB connector to an appropriate USB host port on your computer and you may then access the drive...
Page 8
EC-U2SA / USER MANUAL NoticeS 1. When using this product, please be careful to avoid static electricity discharge on the drive (It is recommended to place your hands on a metal object to safely discharge before handling). 2. This product uses a female U.2 interface which allows for both PCIe U.2 and SATA devices.
EC-U2SA / USER MANUAL Frequently Asked Questions (FAQ) 1. Why is performance slow, not reaching the read and write speed of USB 3.2 Gen 2 on my system? Answer: This product has undergone rigorous testing and the read and write speed can reach USB 3.2 performance under normal read and write conditions.
Page 10
EC-U2SA / USER MANUAL 4. Can NVMe protocol SSDs be used in Windows prior to version 8.1? Answer: Windows 7/8 host systems may need to install an NVMe support patch. Windows 8.1 and later versions have an integrated NVMe driver.
Need help?
Do you have a question about the EC-U2SA and is the answer not in the manual?
Questions and answers