Subscribe to Our Youtube Channel
Related Manuals for Sabrent EC-HDSS
Summary of Contents for Sabrent EC-HDSS
- Page 1 EC-HDSS 2.5” SATA HARD DRIVE/SSD TO USB TYPE-C™ ADAPTER Connect any 2.5” Serial ATA/SATA Notebook Hard Drive or SSD externally to your computer through an available USB Type-C™ port. USER MANUAL...
- Page 2 EC-HDSS INTRODUCTION Package Contents • USB TYPE-C™ Hard Drive/SSD Adapter • User Manual System Requirements Computer system with available USB TYPE-C™ 2.5” SATA hard dirve or SSD Windows, Mac, or Linux INSTALLATION Hardware Installation WARNING! Hard drives and storage enclosures require careful handling, especially when being transported.
- Page 3 EC-HDSS OPERATION Connecting the Hard Drive Once the cable has been attached to a computer, and the necessary software will automatically install, and the drive will be accessible as though it were installed within the system. Prior to using the drive, it will need to be formatted according to your operating system requirements.
- Page 4 EC-HDSS A dialog window should automatically appear, asking you to initialize the drive. Depending on the version of Windows, it will give you the option of either creating an “MBR” or “GPT” disk. GPT (GUID partition) is not compatible with some older operating systems, while MBR is supported by newer and older operating systems.
- Page 5 EC-HDSS SPECIFICATIONS Host Interface: USB TYPE-C™ External Connectors: 1 x 15 pin SATA Power female 1 x 7 pin SATA Data male 1 x USB TYPE-C™ Maximum Data Transfer Rate USB TYPE-C™: 10 Gb/s Compatible Operating Systems Windows, Mac OS, Linux Technical Support support@sabrent.com...
Need help?
Do you have a question about the EC-HDSS and is the answer not in the manual?
Questions and answers