en Steam assistance
When your food is ready, switch off the appli-
‒
ance.
Changing the cooking time
You can change the cooking time at any time.
is highlighted in the display.
Requirement:
Change the cooking time using the
▶
a The appliance applies the change after a few
seconds.
Cancelling the cooking time
You can cancel the cooking time at any time.
is highlighted in the display.
Requirement:
Reset the cooking time to zero using the
▶
a After a few seconds, the appliance applies the
change and continues to heat without a cooking
time.
9.4 Setting the end time
You can delay the time at which cooking is due to fin-
ish by up to 23 hours and 59 minutes.
Notes
¡ The end time cannot be set for types of heating with
grill function.
¡ In order to achieve a good cooking result, do not
delay the end time once the appliance is already in
operation.
¡ Food will spoil if you leave it in the cooking com-
partment too long.
Requirements
¡ The type of heating and a temperature or setting
have been set.
¡ A cooking time is set.
Press the
button repeatedly until
1.
in the display.
2.
Press the or
button.
a The display shows the calculated end time.
Use the
or
button to delay the end time.
3.
a After a few seconds, the appliance applies the set-
ting and the display shows the set end time.
a Once the calculated start time is reached, the appli-
ance starts heating up and the cooking time counts
down.
Steam assistance
10 Steam assistance
When cooking with steam assistance, steam is gener-
ated in the cooking compartment. This gives your food
a crispy crust and a glossy surface. Food stays juicy
and tender, and only undergoes a minimum reduction
in volume.
WARNING ‒ Risk of burns!
While the appliance is in operation, the water bowl
reaches high temperatures.
Never remove the water bowl while the appliance is
▶
in operation.
Only remove the water bowl once it has cooled
▶
down.
12
a When the cooking time has elapsed, a signal
4.
or
button.
Changing the end time
In order to achieve a good cooking result, you can only
change the set end time before operation starts and
the cooking time starts counting down.
Requirement:
▶
button.
a The appliance applies the change after a few
Cancelling the end time
You can delete the set end time at any time.
Requirement:
▶
a After a few seconds, the appliance applies the
9.5 Setting the time on the clock
Once the appliance has been connected to the mains
or following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
Requirement: The function selector must be set to the
"Off" position .
1.
2.
is highlighted
a The time that is set appears in the display.
Changing the time on the clock
You can change the time on the clock at any time.
Requirement: The function selector must be set to the
"Off" position .
1.
2.
a The appliance applies the change after a few
Hot steam may escape when you open the appliance
door. Steam may not be visible, depending on the tem-
perature.
▶
▶
ATTENTION!
Only use the water bowl that is enclosed with the appli-
ance.
▶
sounds and the duration is at zero on the display.
Once the cooking time has elapsed:
Press any button to end the signal prematurely.
‒
To set another cooking time, press the
‒
When your food is ready, switch off the appli-
‒
ance.
is highlighted on the display.
Use the
or
button to delay the end time.
seconds.
is highlighted on the display.
Reset the end time to the current time plus the set
cooking time using the
change and starts heating up. The cooking time
counts down.
Use the
or
button to set the time.
Press the button.
Press and hold the button until the clock flashes
on the display.
Use the
or button to change the time.
seconds.
WARNING ‒ Risk of scalding!
Open the appliance door carefully.
Keep children at a safe distance.
Never fill the bowl while cooking.
button.
button.
Need help?
Do you have a question about the HQA 34B 3 Series and is the answer not in the manual?
Questions and answers