Bosch HQA 34B 3 Series User Manual And Installation Instructions page 11

Rapid heating
8 Rapid heating
To save time, you can use rapid heating to shorten the
preheat time.
8.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Use the function selector to select rapid heating ⁠ .
1.
Use the temperature selector to set the temperature.
2.
Time-setting options
9 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
9.1 Overview of the time-setting options
Use the ⁠ button to select the different time-setting op-
tions.
Time-setting Use
option
Timer You can set the timer to run inde-
pendently of the operation. It does
not affect the appliance.
Cooking time If you set a cooking time, the appli-
ance stops heating automatically
once this time has elapsed.
End For the cooking time, you can set the
time at which you want the operation
to end. The appliance starts up auto-
matically so that the operation fin-
ishes at the required time.
Time You can set the time.
9.2 Setting the timer
The timer runs independently during the operation. You
can set the timer to times of up to 23 hours and 59
minutes, regardless of whether the appliance is on or
off. The timer has its own signal so that you can tell
whether it is the timer or a cooking time that has
elapsed.
Note: The timer and cooking time cannot count down
at the same time. If a cooking time has already been
set, you cannot set the timer.
Press the button repeatedly until
1.
on the display.
Use the ⁠ or ⁠ button to set the timer duration.
2.
Button Default value
5 minutes
10 minutes
The timer duration can be set in 30-second incre-
ments up to 10 minutes. The time increments then
become bigger as the value increases.
a Rapid heating starts after a few seconds.
a When the rapid heating process ends, an audible
3.
4.
a The timer starts and the timer duration begins to
a An audible signal sounds and the timer duration is
3.
Changing the timer
You can change the timer duration at any time.
Requirement: is highlighted in the display.
▶
a The appliance applies the change after a few
Cancelling the timer
You can cancel the timer duration at any time.
Requirement: is highlighted in the display.
▶
a After a few seconds, the appliance applies the
9.3 Setting the cooking time
You can set the cooking time for operation of up to 23
hours 59 minutes.
Requirement: The type of heating and a temperature
or setting have been set.
1.
2.
is highlighted
a After a few seconds, the appliance starts heating
a When the cooking time has elapsed, a signal
3.
Only use rapid heating when a temperature of over
100 °C has been set.
signal sounds and the heating indicator goes out.
Use the function selector to set a suitable type of
heating.
The most suitable types of heating are:
– 3D hot air
– Top/bottom heating
Place the food in the cooking compartment.
count down after a few seconds.
zero in the display when the timer duration has
elapsed.
Press any button to switch off the timer.
Use the or button to change the timer duration.
seconds.
Use the ⁠ button to reset the timer duration to zero.
change and goes out.
Press the ⁠ button repeatedly until
on the display.
Use the ⁠ or ⁠ button to set the time.
Button Default value
10 minutes
30 minutes
The cooking time can be set in one-minute incre-
ments up to one hour, and then in five-minute incre-
ments.
and the cooking time counts down.
sounds and the duration is at zero on the display.
Once the cooking time has elapsed:
Press any button to end the signal prematurely.
‒
To set another cooking time, press the
‒
Rapid heating en
is highlighted
⁠ button.
11