Table of Contents
Advertisement
DVG-2101S User Manual
*
.
T
!
The VoIP Adapter processes call features and the digit plan in the following
sequence:
If you configure the dialing rules or behaviors in the VoIP Adapter as:
Rule 1: in dial prefix settings, set *666 for IVR accessing
Rule 2: in phone book settings, set *666 to map to the URL: abc@domain.com
Rule 3: in the digit map, set *666 to be replaced by 911
Rule 4: in the digit plan, set *666 to be accepted and 911 to be restricted
When there are rules 1 to 4 in the system, pressing *666 will enter the VoIP
Adapter's IVR mode.
When there are rules 2 to 4 in the system, pressing *666 will make a VoIP call
to abc@domain.com
When rule 3 and rule 4 are in the system, pressing *666 will be replaced with
911 by the VoIP Adapter, but this number will not be sent out.
When there is only rule 4 in the system, pressing *666 will immediately send
the dialing to the proxy or UA.
26
The "*" represents the * (star key) on your telephone keypad. For
example, *xx means press * key followed by any two digits from
0-9, such as *69 or *55.
The "." (dot) means repeat the previously listed digit zero or more
times. For example, x. means zero or more digits and xx. means
at least one or more digits.
The "T" represents that an additional timeout period should take
place before automatic send out the dialing.
The "!" in a digit plan means the digit or number is restricted. For
example, 11[0, 2, 4, 9]! means the system will block the numbers
110, 112, 114 and 119. 00886! means that the dial out number
beginning with 00886 is restricted. Note that the "!" can only be
placed at the end of a dialing rule.
Digits Input*
Phone Book
Digit Map
Digit Plan
IVR
Send Out
* Including keypad dialing,
hotline, warm line, etc.
Advanced
Advertisement
Table of Contents
