Seresco CWT Series Operation And Maintenance Manual page 16

Table of Contents

Advertisement

Compressor Wall (10 - detailed further below; see Pic.D.1C).
80
14
15
17
Each compressor module contains a Compressor (13), Plate heat exchanger (14), Evaporator
o
Coil (15), and other refrigeration components to complete a self-contained refrigerant circuit within
each module. Each module also includes a Control Module (17).
Common to the compressor modules is the Glycol Pump (16a), that circulates water/glycol to reject
o
compressor-generated heat.
Motorized water/glycol Reheat (79) and AC (80) valves' opening position determines how
much fluid is diverted to respective coil(s) (reheat and dry cooler or external heat sink).
The compressor wall has a Evaporator Bypass Damper (18) located above the compressor wall and
o
sized appropriately to begin bypassing air around the evaporator coils at a certain suction
temperature to adjust sensible heat ratio.
Seresco CWT Series OMM
16
18
13
79
16a
Pic. D.1C
January 2022

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CWT Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents