Alpine IVA-W205 Owner's Manual page 80

When Connecting External Equipment
(White/Pink)
* Connect this to the touch panel-compatible rear monitor.
(White/Brown)
(White/Brown)
(Orange/White)
System Switch
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM position.
• Be sure to turn the power off to the unit before changing the switch
position.
Remote IN/OUT Connector
CAMERA Input Terminal
Use when connecting a back-up camera.
Video/Audio Output Connectors (AUX OUTPUT)
Use when connecting an optional monitor etc.
Video/Audio Input Connectors (AUX INPUT)
Monitor Control Lead (White/Pink)
Connect this to the Monitor Control Lead of the touch panel-
compatible rear monitor.
78
-EN
Ai-NET
EQ/DIV NORM
M.CONT
REMOTE OUT
REMOTE IN
REVERSE
To Audio Input terminal
To Video Input terminal
To Video Output terminal
To Video Output terminal
To Audio Output terminal
M.CONT (White/Pink)
REMOTE IN (White/Brown)
REMOTE OUT (White/Brown)
Use only when back-up camera is connected.
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Remote Control Input Lead (White/Brown)
Reverse Lead (Orange/White)
Connect to the plus side of the car's reverse lamp which
lights when the transmission is shifted into reverse (R).
Switches the video picture to the back-up camera. This is
linked to putting the car into reverse (R).
RCA Extension Cable (Sold separately)
Rear monitor
(Sold Separately)
Back-up camera
(Sold Separately)
TV Tuner or VCR
(Sold Separately)