Related Manuals for Seco Titan 300 TGL-UP3
Summary of Contents for Seco Titan 300 TGL-UP3
- Page 1 Titan 300 TGL-UP3 SYS-D64-IPC INSTALLATION, USE AND WARNINGS MANUAL Edition: 05/2024...
- Page 2 SYS-D64-IPC PAGE INTENTIONALLY LEFT BLANK Information subject to change. Please visit www.seco.com to find the latest version of this manual.
-
Page 3: Table Of Contents
Measurement layout ................................16 Components ....................................17 6. Installation ........................19 Permitted environmental conditions ........................19 Installing the device ................................20 Versions available ..................................22 7. Maintenance ....................... 24 8. Waste disposal ......................24 Information subject to change. Please visit www.seco.com to find the latest version of this manual. -
Page 4: Preliminary Information
The SYS-D64-IPC device is single board computer enclosed in a metal box with a heat sink. The technology developed by SECO S.p.A. can be used and applied in various fields, such as: Information subject to change. Please visit www.seco.com to find the latest version of this manual. -
Page 5: Recipients
(if not triggered by the device). The complete warranty terms are set out in the sales contract. IMPORTANT The Manufacturer is not liable for improper use of the device. Information subject to change. Please visit www.seco.com to find the latest version of this manual. -
Page 6: Identification
The device is equipped with an identification plate located on the side. The plate features the device identification information to be reported to SECO S.p.A. if necessary, as shown in the table: Information subject to change. Please visit www.seco.com to find the latest version of this manual. - Page 7 • Industrial Operating Temperature Range = “I” • Product Revision Index = “x” CAUTION It is strictly forbidden to remove the identification plate and/or replace it with other plates. Information subject to change. Please visit www.seco.com to find the latest version of this manual.
-
Page 8: Technical Specifications
Mass Storage • Sizes to be configurable: 128GB, 2x128GB, 256GB, 2x 256GB, 512GB, 2x512GB. • Both extended and commercial grade part numbers have to be configurable. Information subject to change. Please visit www.seco.com to find the latest version of this manual. - Page 9 -40 °C ÷ +60 °C (industrial) / CPU: 35 W (PL1: 28 W, PL2: 35 W) temperature in user 0 °C ÷ +50 °C (commercial)** / CPU: 35 W (PL1: 28 W, PL2: 35 W) environment Humidity 10~95% @40°C non-condensing Information subject to change. Please visit www.seco.com to find the latest version of this manual.
- Page 10 Information subject to change. Please visit www.seco.com to find the latest version of this manual.
-
Page 11: Software Specifications
• EN 62368-1:2014+A11:2017 • EN 55032:2015+A11:2020 • EN 55035:2017+A11:2020 • EN IEC 63000:2018. IMPORTANT The Manufacturer is not liable for improper use of the device. Information subject to change. Please visit www.seco.com to find the latest version of this manual. -
Page 12: Fcc Disclaimer
• Consult the dealer or an experienced radio/TV technician for help. IMPORTANT The Manufacturer is not liable for improper use of the device. Information subject to change. Please visit www.seco.com to find the latest version of this manual. -
Page 13: Safety Devices
Keep the device away from exposure to moisture values outside the admissible range indicated in this manual. CAUTION The device must always be fixed to a machine before proceeding with any type of operation and/or use. Information subject to change. Please visit www.seco.com to find the latest version of this manual. - Page 14 For the mouse, keyboard, USB stick and other peripherals connected to the USB port, the plastic shell must have fire rating of V-0 or higher. Information subject to change. Please visit www.seco.com to find the latest version of this manual.
-
Page 15: Safety Pictograms Affixed On The Device And Used In The Manual
Indicates the separate collection of electronic and electrical equipment according to Directive 2012/19/EU. Symbol used to indicate the need to consult the instruction manual before using the equipment. Information subject to change. Please visit www.seco.com to find the latest version of this manual. -
Page 16: Characteristics And Components Of The Device
When running, the device can reach very high temperatures, causing the danger of burns when in contact with the heat sink. Measurement layout Length (A) 236 mm Width (B) 183 mm Height 73 mm Information subject to change. Please visit www.seco.com to find the latest version of this manual. -
Page 17: Components
*Predisposition for the installation of the antenna (if present) for the cellular module (telephone). This part is not covered by the IEC 62368-1 certification. **See table in the following page. Information subject to change. Please visit www.seco.com to find the latest version of this manual. - Page 18 SYS-D64-IPC Power supply input IMAGE DESCRIPTION 1 GND (ground) pin 2 +12/24Vdc pin 12 Pole Bus Connector IMAGE Information subject to change. Please visit www.seco.com to find the latest version of this manual.
-
Page 19: Installation
SECO S.p.A. shall not be held liable if these instructions are not complied with. Information subject to change. Please visit www.seco.com to find the latest version of this manual. -
Page 20: Installing The Device
Proceed to electrically connect the destination machine. SECO S.p.A. shall not be held liable if these instructions are not complied with. Information subject to change. Please visit www.seco.com to find the latest version of this manual. - Page 21 Once inserted, turn the connector clockwise in order to lock it in place; Proceed to electrically connect the destination machine. SECO S.p.A. shall not be held liable if these instructions are not complied with. Information subject to change. Please visit www.seco.com to find the latest version of this manual.
-
Page 22: Versions Available
BiCS5 serie MEC3K0E -40°C to +85°C - Lead Free 2x SSD Module 256GB NVMe PCIe G3x4 M.2_2280, TLC SYS-D64-IPC-xx4x-xxxx-Ex BiCS5 serie MEC3K0E -40°C to +85°C - Lead Free Information subject to change. Please visit www.seco.com to find the latest version of this manual. - Page 23 Linux (Kernel ≥ 5.4 version) SYS-D64-IPC-xxxx-xx0x-Ex No fixing SYS-D64-IPC-xxxx-xx1x-Ex Din bar option SYS-D64-IPC-xxxx-xx2x-Ex Wall mont option SYS-D64-IPC-xxxx-xxx1-Ex I/O board protection SYS-D64-IPC-xxxx-xxx2-Ex NO I/O board protection Information subject to change. Please visit www.seco.com to find the latest version of this manual.
-
Page 24: Maintenance
The substances and materials it contains must be disposed of separately in an appropriate manner. The device must be disposed correctly as it is a waste of electric and electronic equipment (WEEE). Information subject to change. Please visit www.seco.com to find the latest version of this manual. - Page 25 SYS-D64-IPC PAGE INTENTIONALLY LEFT BLANK Information subject to change. Please visit www.seco.com to find the latest version of this manual.
Need help?
Do you have a question about the Titan 300 TGL-UP3 and is the answer not in the manual?
Questions and answers