Connections - Aiwa XR-M75 Operating Instructions Manual

CONNECTIONS
Before connecting the AC cord
The rated voltage of your system shown on the rear panel is 120
V AC. Check that the rated voltage matches your local voltage.
IMPORTANT
Connect the speakers, antennas, and all optional equipment
first. Then connect the AC cord in the end.
There are no differences between the front speakers. Both
speakers can be connected as L (Left) or R (Right).
7 Place the CD player unit on top of the tuner/
amplifier unit and plug in the connector of the
flat cable as shown below.
Note that the connector can be plugged in in only one direction
with the flat cable facing right.
~CD,la,erunit
2
Connect the speaker cords to the tuner/amplifier
unit.
The speaker cord from the right speaker should be connected
to the "R" jack and the cord from the left speaker to the "L
jack.
"R''ijack
After plugging in the connector, allow adequate clearance
between the flat cable and the ventilation openings.
= #
To the left
speaker
To the right
speaker
Rig
T
Speaker cord
G--
AC cord
4
ENGLISH