The table below describes the parameters in this screen. Settings in boldface are the
default and suggested parameter settings.
Parameter
Description
Legacy Diskette
Shows the capacity of diskette drive installed.
A:
Primary Master
Shows the Primary Master information. Press Enter to access the sub-
menu.
Secondary
Shows the Secondary Master information. Press Enter to access the sub-
Master
menu.
PCI IRQ Routing
Press Enter to access and set the PCI IRQ Routing sub-menu.
Resume on LAN/
When enabled, resume activity upon access from LAN.
Modem Access
Options: Enabled or Disabled
Reset
Select Yes to clear the extended system configuration data (ESCD).
Configuration
Options: No or Yes
Data
System Boot
When enabled, allow the system to boot from hard disk recovery.
From Hard Disk
Options: Enabled or Disabled
Recovery
79