74
BIOS Utility
The BIOS Utility is a hardware configuration program built into your computer's BIOS
(basic input/output system).
To activate the BIOS Utility, press F2 during POST. The BIOS setup utility displays
summary information on your computer, its devices, processor and memory.
Your computer is already configured for optimal performance, and so you should not
need to run this utility. However, you may need to change the BIOS settings if you
encounter configuration problems in the future. Refer to "Troubleshooting" if a
problem arises.
Navigating the BIOS Utility
These are the menu options: Information, Main, Advanced, Security, Boot and Exit.
To enter a menu, highlight the item using the ← → keys.
Within a menu, navigate through the BIOS Utility by following these instructions:
Press the cursor up/down keys ( ↑ ↓) to select item.
•
Press the -/+ to change the value of a parameter.
•
Press Enter to go to sub-menu.
•
Press Esc while you are in any of the menu options to return to the main menu
•
Software