Page 1
PA01/PA03/PA03B Power Antenna PA01 PA03/PA03B Installation Guide The information enclosed in this installation guide is intended to provide a general outline to assist you during the process of installation. This guide does not cover every installation possibility, vehicle, or aspect of the installation process.
Page 2
1. Disconnect the battery before you begin the installation. Make sure the area for the antenna has enough clearance to house the antenna. The PA01 antenna requires 11 1/2 inches or 29cm of clearance. The PA03 requires 8 1/2 inches or 22cm of clearance.
Page 3
Blue switched wire to Switched wire antenna lead from radio Red (battery +12 volt) 5 amp fuse to wire from antenna red wire Fuseblock Fuseblock Switched Unswitched Black (-) to chassis ground from antenna PA01 PA03/PA03B Battery Ignition switch...
Page 4
Warranty Your Power Antenna comes with a manufacturer’s warranty covering any defects in materials and workmanship. Retro Manufacturing, LLC (collectively referred to as “the warranter”), at its option, will either (a) repair your unit with new or refurbished parts or (b) replace it with a new or refurbished unit. The warranty period starts from the original purchase date and is valid for the length of time indicated in the chart below.
Need help?
Do you have a question about the PA01 and is the answer not in the manual?
Questions and answers