Sears ProForm 730CS User Manual page 7

3. Locate theplastic tieinthe postontheleftUpright ( 82).
Holda Handrail Extension ( 85)intheposition shown.
Insert t heplastic tie intotheHandrail Extension a syou
insert t he Handrail Extension i ntothepost.Attach the
Handrail Extension w iththreeScrews (76). T heplastictie
is tied to the PulseWire(124), B ecareful t o avoid
damaging the PulseWire,ThePulseWireis usedwith
the optionalchestpulsesensor(seepage18),
Slidea Handrail Foam Grip(110) o ntothe Handrail
Extension ( 85).Press twoPlastic Fasteners ( 47)intothe
Handrail Foam Grip.
Attach theotherHandrail Extension a ndHandrail Foam
Griptothe rightUpright ( notshown). N ote: T hereis nota
pulsewireintherightUpright.
Plastic Tie
110
47
124
Post
85
4. Makesurethatthe LockKnobSleeve (111)is fullyin-
sertedintotheleftUpright (82).
Remove t he LockKnob(102)fromtheLockPin(115).
Makesurethatthe LockPinCollar(113) a ndthe Spring
(112)areontheLockPin.Insert t he LockPinintotheleft
Upright ( 82)andtighten the LockKnobontoit.
3
111 _115
5.
Make sure that all parts are tightened before you use the treadmill, Keep the included allen wrench in a
secure place. The allen wrench is used to adjust the walking belt (see page 21). To protect the floor or carpet
from damage, place a mat under the treadmill.