Table of Contents
Advertisement
Q
S
UICK
TART
5.
Scan a bar code anywhere within 10 meters from the cradle. The scanner
will beep once and flash the white LED. The blue LED of the cradle will also
flash once, indicating that the bar code has been successfully read and
transmitted.
MS9535 Voyager
1.
Auto-trigger mode
When the scanner is at rest in the cradle, it is in auto-trigger mode. While in
this mode, present a bar code in the scanning field and the data is
automatically decoded and transmitted.
2.
CodeGate mode
When the scanner is removed from the cradle, it is in CodeGate mode.
While in this mode, scanned bar code data is only decoded and transmitted
when the CodeGate button is pressed.
MS9535 is shipped from the factory programmed with default settings.
Refer to the MetroSelect
02544B) or MetroSet
scanner.
4
(C
)
ONTINUED
also provides two modes of operation:
BT
Single-Line Programming Guide (
2's help files for instructions on how to configure the
00-
MLPN
- Quick Links:
- Quick Start
Hide quick links:
Advertisement
Table of Contents
