Page 1
MODEL REFRIGERANT System Indoor Outdoor FSNRP50B FINRP50MB HONRP50B Single Split Floor Console Air Conditioner Operation & Installation Manual...
Page 2
This appliance must be installed, maintained and removed only by an Authorised Person. For continued safety of this appliance it must be installed and maintained in accordance with the manufacturer’s instructions. REFRIGERANT Rinnai Single Split Floor Console AC OIM – Issue 1...
Page 4
Air Evacuation Note on Adding Refrigerant ������������������������������������������������������������������������������������������������������������������������������ 51 Test Run Before Test Run ������������������������������������������������������������������������������������������������������������������������������������������������ 52 Electrical Safety Checks ����������������������������������������������������������������������������������������������������������������������������������� 52 Test Run Checks ���������������������������������������������������������������������������������������������������������������������������������������������� 52 Final Checklist ����������������������������������������������������������������������������������������������������������������������������������������������������53 Warranty Contacts Rinnai Single Split Floor Console AC OIM – Issue 1...
For safety and warranty purposes, appliances that may be damaged or incorrect MUST NOT be installed or operated under any circumstances. Installation of damaged or incorrect appliances may contravene local government regulations. Rinnai disclaims any liability or responsibility whatsoever in relation to the installation or operation of damaged or incorrect appliances.
If the air conditioner is used together with burners or other heating devices, thoroughly ventilate theroomtoavoidoxygendeficiency. In certain functional environments, such as kitchens, server rooms, etc., the use of specially designed air-conditioning units is highly recommended. Rinnai Single Split Floor Console AC OIM – Issue 1...
The table below indicates the temperature ranges the air conditioner can be operated within. MODE Cool Mode Heat Mode Dry Mode Room Temperature > 16°C < 30°C > 16°C Outdoor Temperature 0°C ~ 50°C -15°C ~ 24°C 0°C ~ 50°C Rinnai Single Split Floor Console AC OIM – Issue 1...
Page 8
The illustrations used in this manual are for explanatory purposes only and the shape of your indoor unit may vary slightly from that which is shown in this manual. NOTE Rinnai Single Split Floor Console AC OIM – Issue 1...
Special notice – Disposing of this appliance in the forest or other natural surroundings endangers your health and is bad for the environment. Hazardous substances may leak into the ground water IMPORTANT and enter the food chain. Rinnai Single Split Floor Console AC OIM – Issue 1...
TIMER OFF is set • SWING or SILENCE is turned o “ ” when unit is self-cleaning “ ” when 8 C heating feature is turned on Page 9 Rinnai Single Split Floor Console AC OIM – Issue 1...
Keep doors and windows closed. • Limit energy usage by using TIMER ON and TIMER OFF functions. • Do not block air inlets or outlets. • Regularly inspect and clean air lters. • Rinnai Single Split Floor Console AC OIM – Issue 1...
When the outdoor temperature is below zero, the electric heating belt of the outdoor unit chassis is used for ice melting, without defrosting (some models). Rinnai Single Split Floor Console AC OIM – Issue 1 Page 11 ...
Adjust the louver vertically. CAUTION Do not try to adjust the horizontal louver by hand. This may cause damage the mechanism and result in condensation forming on the air outlets. Rinnai Single Split Floor Console AC OIM – Issue 1...
3. Hold the tabs of the frame,and remove the 4 claws. (The special function lter can be washed with water once every 6 months. It isrecommended that you replace it once every 3 years.) Page 13 Rinnai Single Split Floor Console AC OIM – Issue 1...
Page 15
Do not cover the air inlet and outlet of the unit with objects. 4. Replace internal parts. 5. Install the face frame and panel parts. Rinnai Single Split Floor Console AC OIM – Issue 1 Page 14 ...
Please ensure you register your product warranty on line at rinnai.com.au. The Rinnai Customer Care Program is designed to help you get the most out of your new system. Service and maintenance in accordance with the Service Maintenance Schedule on page 17 are essential in ensuring the prolonged useful life of your system, and help ensure it operates at optimum efficiency.
SERVICE MAINTENANCE SCHEDULE - NON DUCTED AIR CONDITIONING SYSTEMS Your Rinnai Air Conditioning System should be maintained annually after the date of installation by a qualified licensed technician in accordance with the Schedule below. Failure to do so during the product warranty period may void your warranty.
This noise is normal and is caused by the refrigerant gas stopping or noises changing direction. Squeaking sound: Normal expansion and contraction of plastic and metal parts caused by temperature changes during operation can cause squeaking noises. Page 15 Rinnai Single Split Floor Console AC OIM – Issue 1...
Page 19
Reduce amount of heat sources room (people, computers, electronics, etc.) Low refrigerant due to leak Check for leaks, re-seal if necessary and or long-term use top o refrigerant Rinnai Single Split Floor Console AC OIM – Issue 1 Page 16 ...
When there are wide differences between “Remote Controller Manual” and “OPERATION • MANUAL” on function description, the description of “OPERATION MANUAL” shall prevail. Rinnai Single Split Floor Console AC OIM – Issue 1...
By ensuring correct disposal, you will user’s authority to operate the equipment. help avoid possible negative consequences for the environment and human health. Rinnai Single Split Floor Console AC OIM – Issue 1...
1% increments. temperature in shortest possible time. SWING Starts and stops the horizontal louver movement. Hold down for 2 seconds to initiate vertical louver auto swing feature. Model: RG10L3(2HS)/BGEF Rinnai Single Split Floor Console AC OIM – Issue 1...
FAN mode. All indicators shown in the figure are for the purpose of clear presentation. But during the actual operation, only the relative function signs are shown on the display window. Rinnai Single Split Floor Console AC OIM – Issue 1...
Set your desired temperature using the TEMP or TEMP button. 3. Press FAN button to select the fan speed in a range of AU-100%. Press the ON/OFF button to start the unit. Boost Humidity Rinnai Single Split Floor Console AC OIM – Issue 1...
Page 25
NOTE: As outdoor temperature drops, the performance of your unit’s HEAT function may be affected. In such instances, we recommend using this air conditioner in conjunction with Boost Humidity other heating appliances. Rinnai Single Split Floor Console AC OIM – Issue 1...
2.5h later (3:30PM) and turn off at 6:00PM. Current 2:00PM 3:00PM 3:30PM time 1PM 2.5 hours later 5 hours later Rinnai Single Split Floor Console AC OIM – Issue 1...
Press this button to turn on and turn off the indoor unit will display the actual room the display on the indoor unit. temperature. Press more than 5 seconds again will revert back to display the setting temperature. Rinnai Single Split Floor Console AC OIM – Issue 1...
Page 28
This feature avoids direct air flow blowing on the body and makes you feel indulging in silky coolness. NOTE: This feature is available under cool, Fan and Dry mode only. Rinnai Single Split Floor Console AC OIM – Issue 1...
Page 29
Boost jump-start the cooling process. When you select Boost feature in HEAT mode, for units with Electric heat elements, the Electric HEATER will activate and jump-start the heating process. Rinnai Single Split Floor Console AC OIM – Issue 1...
Page 30
For some units, it doesn’t in FAN or DRY mode. work by pressing the SET button. To enter the AP mode, continuously press the LED button seven times in 10 seconds. Rinnai Single Split Floor Console AC OIM – Issue 1...
Refer to catalogues and technical literature for guidance on selecting a suitable remote controller. Name Outer Pipe Diameter (mm) 6.35 Liquid side Φ Connecting pipe assembly Gas side 12.7 Φ Rinnai Single Split Floor Console AC OIM – Issue 1...
Install the indoor unit Install the drainpipe Install the outdoor unit Evacuate the refrigeration Connect the wires Connect the refrigerant system pipes Perform a test run Page 19 Rinnai Single Split Floor Console AC OIM – Issue 1 ...
Please select the piping method according to the actual demand. Illustrations in this manual are for explanatory purposes. The actual shape of your indoor unit may be slightly di erent. The actual shape shall prevail. Page 20 Rinnai Single Split Floor Console AC OIM – Issue 1...
Recommended distances between the indoor unit The distance between the mounted indoor unit should meet the speci cations illlustrated in the following diagram. 200mm ≥100mm ≥1000mm 150mm 794mm 150mm Page 21 Rinnai Single Split Floor Console AC OIM – Issue 1...
Page 35
(The bottom of body can touch the oor or remain suspended, but the body must be installed vertically.) NOTE: After installation, the unit shall be kept horizontal without tilting. Rinnai Single Split Floor Console AC OIM – Issue 1 Page 22 ...
Page 36
Drain-pipe Power cord NOTE: In order to drain smoothly, the position of the drain pipe must refer to the above gure when discharging the right pipe. Rinnai Single Split Floor Console AC OIM – Issue 1 Page 23 ...
Page 37
0-63. (Optional multi-function board) ENC3 470mm 150mm Recommended position and size of back outlet pipe through wall hole Rinnai Single Split Floor Console AC OIM – Issue 1 Page 24 ...
Page 38
Insulation connecting port Drainage pipe xing requirements When installing the drainage pipe (not provided ), please x it with a tie or rope. Lean over 1/100 Rinnai Single Split Floor Console AC OIM – Issue 1 Page 25 ...
If the unit is frequently exposed to salty air appropriate measures to prevent ice (seaside): buildup and coil damage. Use outdoor unit that is specially designed to resist corrosion. Page 26 Rinnai Single Split Floor Console AC OIM – Issue 1...
Page 40
In cold climates, make sure that the drain hose is as vertical as possible to ensure swift water drainage. If water drains too slowly, it can freeze in the hose and ood the unit. Rinnai Single Split Floor Console AC OIM – Issue 1...
Page 41
The relations between H, A and L are as follows. 25 cm or more L ≤ 1/2H L ≤ H 30 cm or more 1/2H < L ≤ H Can not be installed Page 28 Rinnai Single Split Floor Console AC OIM – Issue 1...
Please purchase the ttings according to the requirements in the manual strictly. Refer the diagram when installing. Liquid side Liquid side Liquid side Indoor Outdoor Indoor Outdoor Indoor Outdoor Page 29 Rinnai Single Split Floor Console AC OIM – Issue 1...
Burrs can a ect the air-tight seal of refrigerant piping connection. They must be completely removed. 1. Hold the pipe at a downward angle to prevent burrs from falling into the pipe. Rinnai Single Split Floor Console AC OIM – Issue 1...
Page 44
Indoor unit tubing Pipe Flare nut Flare form 3. Tighten the are nut as tightly as possible by hand. 4. Using a spanner, grip the nut on the unit tubing. Pipe Rinnai Single Split Floor Console AC OIM – Issue 1...
Page 45
Carefully bend the tubing in the middle according to the diagram below. DO NOT bend the tubing more than 90° or more than 3 times. Bend the pipe with thumb min-radius 10cm Rinnai Single Split Floor Console AC OIM – Issue 1...
. After turning o the power, always wait 10 minutes or more before you touch the electrical components. Page 33 Rinnai Single Split Floor Console AC OIM – Issue 1...
NOTE: The cographs are for explanation purpose only. Your machine may be slightly di erent. The actual shape shall prevail. Rinnai Single Split Floor Console AC OIM – Issue 1 Page 34 ...
The cable should not be loose, and should not pull on the u-lugs. Reinstall the electric box cover and the front panel of the indoor unit. Rinnai Single Split Floor Console AC OIM – Issue 1 Page 35 ...
Close the Low Pressure side of the manifold gauge, and turn o the vacuum pump. Wait for 5 minutes, then check that there has been no change in system pressure. Page 37 Rinnai Single Split Floor Console AC OIM – Issue 1...
Additional charge volume (kg) = { Main length (m) – Factory charged volume 20(m) } × 0.03(kg/m) • Make sure to remove the additional refrigerant amount according to the nameplate rated charge (under 5m refrigerant piping ) under market or government veri cation testing . Rinnai Single Split Floor Console AC OIM – Issue 1...
Ensure the indicators on the remote control and the display panel on the indoor unit work properly. e. Ensure the manual buttons on the indoor unit works properly. Page 39 Rinnai Single Split Floor Console AC OIM – Issue 1...
Is the end user fully aware of the operating procedure? Incorrect operation If you have answered no to any of the above, you must check and correct before appliance hand-over to customer. Rinnai Single Split Floor Console AC OIM – Issue 1...
WARRANTY TERMS OF WARRANTY – AUSTRALIA Rinnai Australia Pty. Ltd. ABN 74 005 138 769, 100 Atlantic Drive, Keysborough VIC 3173. DEFINITIONS The terms listed below shall have the following meanings: “Authorised Service Representative” means an independent service contractor authorised by Rinnai or Rinnai service personnel.
Page 55
Normal Business Hours by an Authorised Service Representative. Repair by persons other than an Authorised Service Representatives may void the Warranty. 2.4 Alternatively to clause 2.3 above, Rinnai can at its discretion elect to pay you an amount equivalent to the cost of repairing or replacing the Product.
Page 56
7 “Purchaser’s Responsibilities” on page 57; c) notifies Rinnai within 30 days of a defect occurring or, in the case of a latent defect, becoming apparent, that a claim is being made under this Warranty; and d) provides, in support of the claim made under this Warranty, a Proof of Purchase.
Page 57
Rinnai to enquire about alternative arrangements. If you wish to make a warranty claim in respect of any fixed Product, please contact Rinnai on the details set out below to make arrangements for an Authorised Service Representative to inspect the product.
Page 58
NOTES Rinnai Single Split Floor Console AC OIM – Issue 1...
Page 59
NOTES Rinnai Single Split Floor Console AC OIM – Issue 1...
If your appliance requires service, please call our National Help Line. Rinnai recommends that this appliance be serviced once a year. With our policy of continuous improvement, we reserve the right to change, or discontinue at any time, specifications or designs without notice.
Need help?
Do you have a question about the FSNRP50B and is the answer not in the manual?
Questions and answers