Miele W 1966 WASHING MACHINE Operating Instructions Manual page 30

With the following guide, minor problems can be fixed without a service call.
To turn off the fault indicator light: Turn off the washer with the "On/Off" button
and turn the program selector to "End".
26
The washer has no power. Check whether:
The lock function is
activated.
The drain is blocked.
The drain hose is too
high.
The water inlet is blocked. Open the water valve.
The inlet hose filter is
clogged.
There is a fault.
– it is plugged in.
– if the circuit breaker
has tripped.
Deactivate the lock
function.
Clean the lint trap and the
drain pump.
The maximum drain
pump height is 4 ft
(1.2 m).
Clean the filter under
running water and
carefully remove any
large particles.
Start the program one
more time. If the fault
message appears again
call Miele's Technical
Service Department.