Miele W 1930 WASHING MACHINE Operating Instructions Manual page 45

To check if the function has
been stored:
^ Perform Steps 1 to 4.
If the "Rinse 1-2" lamp lights, the pro-
grammable function is active.
^ Press the "ON/OFF" button. This fin-
ishes the check of the programmable
function.
If, after Step 2, the programm selec-
tor is accidentally turned to a setting
other than one of the three shown:
– If the "Rinse 1-2" indicator does
not light – no function was
activated.
– If the "Rinse 1-2" indicator
lights – proceed as in "Deleting
the additional functions".
Exception: the "Rinse 1-2" indicator
lamp will light up if the programm
selector is set to "COTTONS 190°F".
Programmable functions
Deleting the additional func-
tions:
Follow the same instructions given un-
der "To activate the additional func-
tions", steps 1 to 5.
When the "Rinse 1-2" lamp goes out;
^ Press "ON/OFF".
The additional function has now been
deleted.
45