Problem Solving Guide - Miele W 1930 WASHING MACHINE Operating Instructions Manual

Any work done on the electrical components of this appliance should only
be performed by a qualified technician in accordance with all local and na-
tional codes and regulations. Unauthorized repairs may result in personal
injury and machine damage.
What to do if, . . .
. . . The program does
not start?
. . . The "Check
indicator lamps are
flashing?
Cause . . .
There is no power.
The "ON" indicator lamp
has not lit up.
There is power and the
"ON" indicator lamp is on,
but the program selector
has not been turned to
the "Finish / Start" posi-
tion.
The "Check p" indicator
/ "
lamp is flashing, and the
program has started.
The water inlet is blocked.
The "Check q" indicator
lamp is flashing.
The drain is blocked.

Problem solving guide

Remedy . . .
Check that..:
– the door is properly
closed.
– the machine is plugged
in.
– the fuse or circuit
breaker has not trip-
ped.
– Turn the program se-
lector to the "Finish /
Start" position.
– Select a program.
– The inlet valve is not
opened far enough.
– The inlet hose is
kinked.
– The water pressure is
too low. Call the Techni-
cal Service Dept.
– Clean the drain pump
and lint trap.
– Has the drain hose
been installed too
high? (max drain height
= 4 feet)
25