Standby Display; Memory - Miele W 1512 Operating Instructions Manual

Standby display

To save energy, the display goes out
and the indicator light for the Start/
Stop button will start flashing slowly.
The display will always go out,
– if a programme is not selected within
10 minutes of the machine being
switched on.
– 10 minutes after the end of a
programme.
Pressing one of the buttons switches
the display back on again.
You can also choose whether you want
the display to go out 10 minutes after a
programme has started or to remain
visible throughout the programme.
On
The standby function is switched on.
When this option is selected, the
display will go out 10 minutes after a
programme has started.
Not in current prog.
(the machine is delivered with this
option selected)
The standby function is switched off.
The display will remain visible during a
programme.
A tick L will appear beside the option
to show that it has been set.
Programmable functions

Memory

If an extra option has been selected
for a programme, or the
recommended temperature or spin
speed has been altered, the machine
will store the changes in memory at
the start of a programme.
When this programme is chosen again
these settings will appear in the display.
The machine is delivered with the
memory function deactivated.
59