Standby Display; Memory; Anti-Crease - Miele W 5965 WPS Operating Instructions Manual

Settings menu

Standby display

To save energy, the display goes out
after 10 minutes and the indicator
light for the Start/Stop button will start
flashing slowly.
The display will always go out
– if a programme is not selected within
10 minutes of the machine being
switched on.
– 10 minutes after the end of a
programme.
Pressing one of the buttons switches
the display back on again.
You can also choose whether you want
the display to go out 10 minutes after a
programme has started or to remain
visible throughout the programme.
On
The time of day display is switched on.
When this option is selected, the
display will go out 10 minutes after a
programme has started.
Not in current prog.
(the machine is delivered with this
option selected as standard)
The time of day display is switched on.
The display will remain visible during a
programme.
80

Memory

If an Extra option has been selected
for a programme, or the
recommended temperature or spin
speed has been altered, the machine
will store the changes in memory at
the start of a programme.
When this programme is chosen again,
these settings will appear in the
display.
The machine is delivered with the
memory function deactivated.

Anti-crease

Anti-crease helps prevent creasing if
the laundry is not normally removed
immediately after the end of a
programme.
The drum will continue to rotate for up
to 30 minutes after the programme end.
The washing machine door can be
opened at any time.
On
Anti-crease is activated.
Off
(the machine is delivered with this
option selected as standard)
Anti-crease is deactivated.