Table of Contents
Advertisement
With the aid of the following guide, minor problems can be fixed without a service
call.
,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
What if ...
the dishwasher does not
start?
the dishwasher stops
during a program?
the "Intake" indicator is
lit or flashing and the
dishwasher may have
stopped?
Frequently asked questions
Possible fault
The door is not properly
closed.
The machine is not
plugged in.
The fuse is defective or
the breaker has tripped.
The fuse or breaker has
tripped.
The water valve is closed. Open the water valve.
The filter in the water inlet
is blocked.
The flow pressure at the
water inlet is less than
4.5 psi (0.3 bar).
The waterproof system
has activated.
Fix
Close the door firmly.
Insert the plug.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
See maintenance
instructions.
Contact a plumber.
Call the Miele Technical
Service Department.
39
Advertisement
Table of Contents
