Table of Contents
Advertisement
Interrupting a program
A program is interrupted as soon as the
door is opened.
If the door is closed, the program will
continue from where it was interrupted.
,
Water in the dishwasher may be
hot. There is a danger of being
burned!
Only open the door if absolutely
necessary.
Changing a program
If a program has not yet started:
^ Press the "Start/Stop" button (18) for
at least one second.
^ Select the new program using the
program selection buttons (21).
^ Select "Top Solo" and "Delay Start" if
needed (see "Additional features").
^ Press the "Start/Stop" button (18).
The program will begin.
If a program is already running, or if the
selected delay start period has started
counting down:
^ Press the "Start/Stop" button (18) for
at least one second.
^ Select the new program using the
program selection buttons (21).
^ Select "Delay Start" or "Top Solo" if
needed (see "Additional features").
^ Press the "Start/Stop" button (18).
The "Start/Stop" indicator will go out.
The program cycle will resume.
Operation
33
Advertisement
Table of Contents
