Related Manuals for SW-Motech BC.HTA.07.740.36000
Summary of Contents for SW-Motech BC.HTA.07.740.36000
- Page 1 ANBAUANLEITUNG mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio BC.HTA.07.740.36000 beinhaltet • contains • contient • contiene • contiene HTA.07.740.86000/B BC.HTA.00.740.31000...
-
Page 2: Safety Warning Symbol
~ 1 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available. - Page 3 Use thread locker: Indicates that a thread must be coated with liquid thread locker. H (HIGH): high strength; M (MEDIUM): medium strength; L (LOW): low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 4 M5 x 12; ISO 7380 ø 5,3; DIN 9021 MU.A4.05.01.985.70 SC.A2.05.012.01.7380.M3 US.A2.053.01.9021 M8 x 25; DIN 912 ø 8,4; DIN 125 SC.ST.08.025.02.912.088 US.ST.084.02.125 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 5 Tighten the screws (5) as specified in the mounting instructions. CAUTION: Tightening the screws (5) too tightly will damage the plastic parts. × × 2.5 Nm The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 6 Pay attention to the attachment point shown in the detailed drawing. Do not tighten the screws (13) yet. × × × 1.5 Nm × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 7 Screw the mounting brackets (1/2) onto the vehicle. × WARNING: Use liquid thread locker! Tighten the screws (15) according to the manufacturer's instructions. × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 8 WARNING: before starting your journey, check that all components are firmly seated. Remove the connectors (9/10) from the vehicle when driving WITHOUT saddlebags. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 9 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Need help?
Do you have a question about the BC.HTA.07.740.36000 and is the answer not in the manual?
Questions and answers