Subscribe to Our Youtube Channel
Related Manuals for SW-Motech BC.HTA.06.740.36900
Summary of Contents for SW-Motech BC.HTA.06.740.36900
- Page 1 ANBAUANLEITUNG mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio BC.HTA.06.740.36900 beinhaltet • contains • contient • contiene • contiene HTA.06.740.86900/B BC.HTA.00.740.31000 BC.HTA.00.740.12200/B...
-
Page 2: Safety Warning Symbol
~ 1 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available. - Page 3 Use thread locker: Indicates that a thread must be coated with liquid thread locker. H (HIGH): high strength; M (MEDIUM): medium strength; L (LOW): low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 4 Ø 14 / ø 6.2 / h 5 DB.ST.0140.0062.0050.02 M5 x 30; ISO 7380 HTA.06.740.015/TB SC.ST.05.030.02.7380.109 M8 x 30; ISO 7380 SC.ST.08.030.02.7380.109 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 5 Tighten the screws (5) as specified in the mounting instructions. CAUTION: Tightening the screws (5) too tightly will damage the plastic parts. × × 2.5 Nm The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 6 Pay attention to the attachment point shown in the detailed drawing. Do not tighten the screws (13) yet. × × × 1.5 Nm × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 7 [4]. Then screw the brake fluid reservoir with the original parts (Orig.) to the back of the frame bracket as shown in the detailed drawing. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 8 (Orig.) onto the inside of the passenger footrest holder Tighten the screw (17) as specified in the mounting instructions. × 3 Nm The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 9 WARNING: Use liquid thread locker! Tighten the screws (18) as specified in the mounting instructions. 23 Nm The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 10 WARNING: before starting your journey, check that all components are firmly seated. Remove the connectors (9/10) from the vehicle when driving WITHOUT saddlebags. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 11 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 18 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
- Page 19 ASSEMBLY section, the vehicle manufacturer's our online shop: specifications must be observed and applied. www.sw-motech.com The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 20 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! BC.HTA.00.740.003.02 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 21 Thoroughly clean any grease and dirt residues from the determined adhesive positions. Remove the foils from the adhesive surfaces of the abrasion/edge protectors (1). The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 22 Check the correct positioning of the abrasion/edge protectors (1) again once the BLAZE saddlebags have been loaded. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 23 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Need help?
Do you have a question about the BC.HTA.06.740.36900 and is the answer not in the manual?
Questions and answers