Related Manuals for SW-Motech BC.HTA.08.740.36500
Summary of Contents for SW-Motech BC.HTA.08.740.36500
- Page 1 ANBAUANLEITUNG mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio BC.HTA.08.740.36500 beinhaltet • contains • contient • contiene • contiene HTA.08.740.86500/B BC.HTA.00.740.31000 BC.HTA.00.740.12200/B...
-
Page 2: Safety Warning Symbol
~ 0.5 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available. - Page 3 Use thread locker: Indicates that a thread must be coated with liquid thread locker. H (HIGH): high strength; M (MEDIUM): medium strength; L (LOW): low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 4 Ø 25 / ø 10.5 / h 4 US.ST.084.02.125 DB.00.160.084.018.01 DB.ST.0250.0105.0040.01 M5 x 16; DIN 6912 HTA.00.740.532.01 HTA.00.740.531.01 HTA.11.740.A18R.01 HTA.11.740.A18L.01 KES.RD.150.0200.02.GL SC.ST.05.016.02.6912.088 M5; DIN 985 MU.A4.05.01.985.70 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 5 Remove the original screws from the passenger footrest holder. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 6 × CAUTION: Tightening the screws (5) too tightly will damage the plastic parts. × × × 2.5 Nm The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 7 Tighten the original (Orig.) screws according to the manufacturer's × instructions. × × 20 Nm × 20 Nm × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 8 WARNING: Then check that the support arms (17/18) are firmly in place! × × × × 1.5 Nm × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 9 WARNING: Before starting your journey, check that all components are firmly in place! Remove the connectors (15/16) from the vehicle when driving WITHOUT saddlebags! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 10 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 17 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
- Page 18 ASSEMBLY section, the vehicle manufacturer's our online shop: specifications must be observed and applied. www.sw-motech.com The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 19 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! BC.HTA.00.740.003.02 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 20 Thoroughly clean any grease and dirt residues from the determined adhesive positions. Remove the foils from the adhesive surfaces of the abrasion/edge protectors (1). The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 21 Check the correct positioning of the abrasion/edge protectors (1) again once the BLAZE saddlebags have been loaded. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 22 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Need help?
Do you have a question about the BC.HTA.08.740.36500 and is the answer not in the manual?
Questions and answers