Subscribe to Our Youtube Channel
Related Manuals for SW-Motech BC.HTA.11.740.35500
Summary of Contents for SW-Motech BC.HTA.11.740.35500
- Page 1 ANBAUANLEITUNG mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio BC.HTA.11.740.35500 beinhaltet • contains • contient • contiene • contiene HTA.11.740.85500/B BC.HTA.00.740.31000...
- Page 2 ~ 1 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
- Page 3 Use thread locker: Indicates that a thread must be coated with liquid thread locker. H (HIGH): high strength; M (MEDIUM): medium strength; L (LOW): low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 4 M8 x 45; ISO 7380 Ø 22 / ø 8,4 / h 30 M8; DIN 6927 SC.ST.08.045.02.7380.109 DB.PA.220.084.030.02 MU.ST.08.02.6927.08 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 5 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! M8 x 55; DIN 912 Ø 35 / ø 8,4 / h 10 SC.ST.08.055.01.912.088 DB.AL.0350.0084.0100.02 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 6 Tighten the screws (5) as specified in the mounting instructions. CAUTION: Tightening the screws (5) too tightly will damage the plastic parts. × × 2.5 Nm The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 7 Pay attention to the attachment point shown in the detailed drawing. Do not tighten the screws (13) yet. × × × 1.5 Nm × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 8 Screw attachments (15), (16), (17), and (18) to the mounting bracket (1). × Tighten the screw (15) as described in the mounting instructions. 23 Nm × × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 9 MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS! Remove the original passenger footrests from the vehicle. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 10 MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS! Remove the original parts shown here from the vehicle. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 11 Screw the mounting bracket (1) to the vehicle. × WARNING: Use a liquid threadlocker! Tighten the screw (19) according to the manufacturer’s instructions. × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 12 Screw attachment parts (22), (23) and (24) to the mounting bracket (2). × Tighten screw (22) as described in the mounting instructions. 23 Nm × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 13 Screw the mounting bracket (2) to the vehicle. × WARNING: Use a liquid threadlocker! Tighten the screw (25) according to the manufacturer’s instructions. × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 14 MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS! Remount the original passenger footrests (Orig.) on the vehicle. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 15 WARNING: Before starting your journey, check that all components are firmly in place! Remove the connectors (10/11) from the vehicle when driving WITHOUT saddlebags! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 16 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Need help?
Do you have a question about the BC.HTA.11.740.35500 and is the answer not in the manual?
Questions and answers