Subscribe to Our Youtube Channel
Related Manuals for SW-Motech BC.HTA.07.740.36001
Summary of Contents for SW-Motech BC.HTA.07.740.36001
- Page 1 ANBAUANLEITUNG mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio BC.HTA.07.740.36001 beinhaltet • contains • contient • contiene • contiene HTA.07.740.86000/B BC.HTA.00.740.31000 BC.HTA.00.740.12100/B...
- Page 2 ~ 1 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
- Page 3 Use thread locker: Indicates that a thread must be coated with liquid thread locker. H (HIGH): high strength; M (MEDIUM): medium strength; L (LOW): low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 4 M5 x 12; ISO 7380 ø 5,3; DIN 9021 MU.A4.05.01.985.70 SC.A2.05.012.01.7380.M3 US.A2.053.01.9021 M8 x 25; DIN 912 ø 8,4; DIN 125 SC.ST.08.025.02.912.088 US.ST.084.02.125 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 5 Tighten the screws (5) as specified in the mounting instructions. CAUTION: Tightening the screws (5) too tightly will damage the plastic parts. × × 2.5 Nm The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 6 Pay attention to the attachment point shown in the detailed drawing. Do not tighten the screws (13) yet. × × × 1.5 Nm × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 7 Screw the mounting brackets (1/2) onto the vehicle. × WARNING: Use liquid thread locker! Tighten the screws (15) according to the manufacturer's instructions. × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 8 WARNING: before starting your journey, check that all components are firmly seated. Remove the connectors (9/10) from the vehicle when driving WITHOUT saddlebags. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 9 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 16 ~ 0.5 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
- Page 17 ASSEMBLY section, the vehicle manufacturer's our online shop: specifications must be observed and applied. www.sw-motech.com The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 18 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! BC.HTA.00.740.005.02 BC.HTA.00.740.007R.02 BC.HTA.00.740.004R.02 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 19 Remove the foil from the adhesive surfaces of the adhesive Velcro strip (2) and affix it to the spots indicated along the edge of the Blaze saddlebag. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 20 Loop the Velcro strap (1) onto the rear loop of your Blaze saddlebag. Pull the Velcro strap (1) until taut. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 21 WARNING: Before each ride, check that the heat guard (3) is properly and securely fastened! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 22 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Need help?
Do you have a question about the BC.HTA.07.740.36001 and is the answer not in the manual?
Questions and answers