Related Manuals for SW-Motech BC.HTA.06.740.36500
Summary of Contents for SW-Motech BC.HTA.06.740.36500
- Page 1 ANBAUANLEITUNG mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio BC.HTA.06.740.36500 beinhaltet • contains • contient • contiene • contiene HTA.06.740.86500/B BC.HTA.00.740.31000...
-
Page 2: Safety Warning Symbol
~ 1 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available. - Page 3 Use thread locker: Indicates that a thread must be coated with liquid thread locker. H (HIGH): high strength; M (MEDIUM): medium strength; L (LOW): low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 4 M5 x 12; ISO 7380 ø 5,3; DIN 9021 MU.A4.05.01.985.70 SC.A2.05.012.01.7380.M3 US.A2.053.01.9021 M8 x 60; DIN 6912 ø 8,4; DIN 125 SC.ST.08.060.02.6912.088 US.ST.084.02.125 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 5 Tighten the screws (5) as specified in the mounting instructions. CAUTION: Tightening the screws (5) too tightly will damage the plastic parts. × × 2.5 Nm The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 6 Pay attention to the attachment point shown in the detailed drawing. Do not tighten the screws (13) yet. × × × 1.5 Nm × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 7 MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS! Remove the original parts shown here from the vehicle. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 8 Screw the mounting brackets (1/2) onto the vehicle. × WARNING: Use a liquid threadlocker! Tighten the screws (15) according to the vehicle manufacturer’s specifications. × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 9 WARNING: before starting your journey, check that all components are firmly seated. Remove the connectors (9/10) from the vehicle when driving WITHOUT saddlebags. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 10 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Need help?
Do you have a question about the BC.HTA.06.740.36500 and is the answer not in the manual?
Questions and answers