Default Zoom
By pressing
/
You can set Default Zoom to Full, Panoramic, 4:3
or 14:9 Zoom by pressing
Blue Background
By pressing
/
button, select Blue Background.
Press
/
button to set Blue Background as on or
off.
Menu Background
By pressing
/
ground. You can change menu background to Trans-
lucent or Opaque by pressing
Menu Timeout
By pressing
/
Press
/
button to change menu timeout to 15 sec,
30 sec or 60 sec.
Teletext Language
By pressing
/
guage. Press
/
button to change Teletext Lan-
guage to West, East, Turk/Gre, Cyrillic or Arabic.
Install Menu
INSTALL
Program
Band
Channel
Colour System
Sound System
Fine Tune
Search
VCR
Store Program
Program
By pressing
/
button, select Program. Press
/
button to select the program number. You can also
enter a number via digit buttons on the remote control.
There are 100 program storage between 0 and 99.
Band
Band can be selected either C or S by press
button.
Channel
Channel can be changed by
tons.
button, select Default Zoom.
/
button.
button, select Menu Back-
/
button.
button, select Menu Timeout.
button, select Teletext Lan-
AUTO
423.25
/
button or Digit But-
Colour System
By pressing
Press
/
PAL, SECAM or AUTO.
If Sound System is set to I, SECAM is not available
for the Colour System.
NOTE: In EXT mode, you can choose NTSC 3.58,
NTSC 4.43 or PAL60 as well.
Sound System
By pressing
Press
/
I, DK, L or LP.
Fine Tune
By pressing
/
button to adjust the tuning.
Search
By pressing
button to start program searching.You can also
enter the desired frequency via digit buttons when
search item is highlighted.
VCR
This item can be seen in all modes except YPbPr,
HDMI and PC.
If you want to watch a VCR source from one of these
modes, then it will be better to set VCR mode "on".
1
S
For this, while the cursor is on this item press the
36
buttons to set it On.
If you want to watch a DVD , then you must set this
BG
item Off.
0
Store Program
Off
By pressing
Press
or OK button to store the adjustments. "Pro-
gram Stored" will be displayed on the screen.
Program Menu
/
English - 22 -
/
button, select Colour System.
button to change the colour system to
/
button, select Sound System.
button to change the sound system to BG,
/
button, select Fine Tune. Press
/
button, select Search. Press
/
button, select Store Program.
PROGRAM
01 S-16
11 C-12
02 S-16
12 C-21
03 ARD
13 C-23
04 BBC1
14 C-43
05 D
15 C-55
06 CH4
16 C-57
07 BBC2
17 C-64
08 C06
18 C-68
19 S-20
09 C09
10 C10
20 S-20
Name
Insert
Delete
APS
/
/
21 S-20
22 S-33
23 S-34
24 S-35
25 S-36
26 S-40
27 -----
28 -----
29 -----
30 -----