dji MAVIC 3M User Manual
  1. Manuals
  2. Brands
  3. dji Manuals
  4. Drones
  5. mavic
  6. User manual
dji MAVIC 3M User Manual

dji MAVIC 3M User Manual

Hide thumbs Also See for MAVIC 3M:
Table of Contents

Advertisement

Quick Links

User Manual
v1.4
2023.09

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MAVIC 3M and is the answer not in the manual?

Questions and answers

Related Manuals for dji MAVIC 3M

Summary of Contents for dji MAVIC 3M

  • Page 1 User Manual v1.4 2023.09...
  • Page 2 This document is copyrighted by DJI with all rights reserved. Unless otherwise authorized by DJI, you are not eligible to use or allow others to use the document or any part of the document by reproducing, transferring or selling the document. Users should only refer to this document and the content thereof as instructions to operate DJI UAV.

  • Page 3: Using This Manual

    3M safely: https://ag.dji.com/mavic-3-m/video Download DJI Assistant 2 Download and install DJI ASSISTANT 2 (Enterprise Series) or DJI Assistant 2 (MG Series) using the links below: https://www.dji.com/mavic-3-enterprise/downloads https://ag.dji.com/mavic-3-m/downloads The operating temperature of this product is -10° to 40° C. It does not meet the standard operating temperature for military-grade application (-55°...

  • Page 4: Table Of Contents

    Advanced Pilot Assistance Systems (APAS 5.0) Pre-Flight Checklist Starting/Stopping the Motors Flight Test Aircraft Flight Modes Aircraft Status Indicator Spectral Sunlight Sensor and Auxiliary Light Flight Recorder Propellers Intelligent Flight Battery Gimbal Camera PSDK Port   © 2023 DJI All Rights Reserved.
  • Page 5 Camera View Map View Annotation Management Flight Tasks Health Management System (HMS) Appendix Specifications Firmware Update Post-Flight Checklist Maintenance Instructions Troubleshooting Procedures Risk and Warnings Disposal C2 Certification FAR Remote ID Compliance Information   © 2023 DJI All Rights Reserved.

  • Page 6: Product Profile

    3 hours. * There are some requirements and restrictions when using Mavic 3M EU in EU since they are comply with C2 certification. Otherwise, The features and functions described in this manual apply to DJI Mavic 3M and DJI Mavic 3M EU.

  • Page 7: Using For The First Time

    DJI Mavic 3M User Manual DJI Pilot 2 App: Vegetation index maps such as NDVI, GNDVI, or NDRE can be viewed in real time in the DJI Pilot 2 app for information on plant health, plant growth, soil conditions, and more.
  • Page 8 DJI Mavic 3M User Manual 2. Unfold the front arms before unfolding the rear arms. 3. Remove the gimbal protector from the camera. 4. Attaching the propellers. Propellers with and without marks indicate different directions of rotation. Attach the propellers with marks to the motors with marks and the unmarked propellers to the motors without marks.
  • Page 9 DJI Mavic 3M User Manual • Make sure to unfold the front arms before unfolding the rear arms. • Make sure the gimbal protector is removed and all arms are unfolded before powering on the aircraft. Otherwise, it may affect the aircraft self-diagnostics.

  • Page 10: Overview

    DJI Mavic 3M User Manual Overview Aircraft 1. Gimbal and Camera 11. Landing Gears (Built-in antennas) 2. Horizontal Omnidirectional 12. Upward Vision System Vision System 13. USB-C Port 3. RTK Module (PSDK port) 14. Camera microSD Card Slot 4. Auxiliary Light 15.
  • Page 11 Use the control sticks to control the 7. Power Button aircraft movements. Set the flight control mode in DJI Pilot 2. The control Press once to check the current battery sticks are removable and easy to store. level. Press, and then press and hold to power the remote controller on or off.

  • Page 12: Activation

    If linking is needed, refer to the Remote Controller Linking section for more details. Check the internet connection if the activation fails. Make sure internet access is available and try activating the remote controller again. Contact DJI Support if the activation fails multiple times.  ...

  • Page 13: Flight Safety

    Make sure to have training and practice before operating any actual flight. Practice with the simulator in DJI Assistant 2 or fly under the guidance of experienced professionals. Pick a suitable area to fly in according to the following flight requirements and restrictions. Fly the aircraft below 120 m (400 ft).

  • Page 14: Operating The Aircraft Responsibly

    The aircraft may behave abnormally or lose control when flying in areas with too much interference. Return to the Home Point and land the aircraft if prompted to do so in DJI Pilot 2.

  • Page 15: Vision Systems And Infrared Sensing System

    DJI Mavic 3M User Manual Vision Systems and Infrared Sensing System DJI Mavic 3M is equipped with both an Infrared Sensing System and Horizontal Omnidirectional (Forward, Backward, Lateral), Upward, and Downward Vision Systems. The Upward and Downward Vision Systems consist of two cameras each, and the Forward, Backward, and Lateral Vision Systems consist of four cameras in total.
  • Page 16 Normal mode and Obstacle Avoidance is set to Avoid or Brake in DJI Pilot 2. The aircraft can actively brake when detecting obstacles when using the Horizontal Omnidirectional, and Upward Vision Systems. The Horizontal Omnidirectional and Upward Vision Systems work best with adequate lighting and clearly marked or textured obstacles.

  • Page 17: Return To Home

    Infrared Sensing system. DO NOT use any cleaning product that contains alcohol. c. Contact DJI Support if there is any damage to the glass of the Infrared Sensing and Vision Systems. • DO NOT obstruct the Infrared Sensing System.
  • Page 18 Advanced RTH is enabled if the lighting is sufficient and the environment is suitable for vision systems when Smart RTH is triggered. The aircraft will automatically plan the best RTH path, which will be displayed in DJI Pilot 2 and will adjust according to the environment. RTH Settings RTH settings are available for Advanced RTH.
  • Page 19 DJI Mavic 3M User Manual Advanced RTH Procedure 1. The Home Point is recorded automatically. 2. Advanced RTH is triggered. 3. The aircraft brakes and hover in place. a. The aircraft lands immediately if it is less than 5 m from the Home Point when RTH begins.
  • Page 20 Home Point from its current location. A warning prompt will appear in DJI Pilot 2 when the battery level is low and the aircraft can only support Low Battery RTH.
  • Page 21 The illustration shown below is the Battery Level Indicator Bar located at the top bar of the DJI Pilot 2 app. Refer to the Top Bar section in the DJI Pilot 2 app chapter for more information.
  • Page 22 RTH path that was generated by the aircraft before the remote controller signal was lost and return to home using Advanced RTH according to the RTH settings. The aircraft will remain in RTH even if the remote controller signal is restored. DJI Pilot 2 will update the RTH path accordingly.
  • Page 23 Failsafe RTH. The aircraft will hover in place for a while before landing. • It is important to set a suitable RTH altitude before each flight. Launch DJI Pilot 2 and set the RTH altitude. The default RTH altitude is 100 m.

  • Page 24: Flight Restrictions

    Zones, Warning Zones, Enhanced Warning Zones, and Altitude Zones. Users can view such information in real-time in DJI Pilot 2. GEO Zones are specific flight areas, including but not limited to airports, large event venues, locations where public emergencies have occurred (such as forest fires), nuclear power plants, prisons, government properties, and military facilities.
  • Page 25 By default, the GEO system limits takeoffs and flights in zones that may cause safety or security concerns. A GEO Zone map that contains comprehensive information on GEO Zones around the globe is available on the official DJI website: https://www.dji.com/flysafe/ geo-map.
  • Page 26 In Flight: when the GNSS signal changes from weak to strong, a 100-second countdown will commence in DJI Pilot 2 if the aircraft exceeds The aircraft altitude the altitude limit. When the countdown is...
  • Page 27 This unlocking option is available in all countries and regions and can be requested via the DJI Fly Safe website at https://www.dji.com/flysafe. Unlocking on Mobile Device: run the DJI Pilot 2 app and tap GEO Zone Map on the home screen. View the list of the unlocking licenses and tap to view details of the unlocking license.
  • Page 28 Prompt in DJI Pilot 2 The altitude of the aircraft cannot Aircraft approaching max Max Altitude exceed the value set in DJI Pilot 2. flight altitude. Fly with caution. The straight-line distance from the aircraft to the Home Point cannot...

  • Page 29: Dji Airsense

    When the DJI AirSense system detects a risk, the AR projection display will appear in DJI Pilot 2, intuitively showing the distance between the DJI aircraft and the airplane and issuing a warning alert.

  • Page 30: Advanced Pilot Assistance Systems (Apas 5.0)

    • Be extra cautious when flying in extremely dark (<300 lux) or bright (>10,000 lux) environments. • Pay attention to DJI Pilot 2 and make sure APAS is working normally. • APAS may not function properly when the aircraft is flying near flight limits or in a GEO zone.

  • Page 31: Pre-Flight Checklist

    10. To ensure flight safety, enter the camera view of DJI Pilot 2 and check the parameters on the pre-flight checklist, such as the failsafe settings, control stick mode, RTH height, and obstacle distance.

  • Page 32: Starting/Stopping The Motors

    DJI Mavic 3M User Manual Starting/Stopping the Motors Starting the Motors A Combination Stick Command (CSC) is used to start the motors. Push both sticks to the inner or outer bottom corners to start the motors. Once the motors start spinning, release both sticks simultaneously.

  • Page 33: Flight Test

    2. Power on the remote controller and the aircraft. 3. Launch DJI Pilot 2 and enter the camera view. 4. Wait for the aircraft self-diagnostics to complete. If DJI Pilot 2 does not show any irregular warning, you can start the motors.

  • Page 34: Aircraft

    Note: obstacle sensing is disabled and the maximum flight speed is 21 m/s. Function Mode: Function mode can be set to T-mode (Tripod mode) or A-mode (Attitude mode) in DJI Pilot 2. T-mode is based on Normal mode. The flight speed is limited to allow easier control of the aircraft.

  • Page 35: Aircraft Status Indicator

    Make sure to maintain adequate maneuvering space during flight. • When switching the GNSS to the BeiDou satellite positioning system in DJI Pilot 2, the aircraft only uses a single positioning system and the satellite search capability becomes poor.

  • Page 36: Spectral Sunlight Sensor And Auxiliary Light

    To obtain better footage, the front LEDs turn off automatically when shooting if the front LEDs are set to auto in DJI Pilot 2. Lighting requirements vary depending on the region. Observe local laws and regulations.

  • Page 37: Flight Recorder

    It will automatically turn on by default in low-light environments when the flight altitude is under 5 m. Users can also turn it on or off manually in the DJI Pilot 2 app. Each time the aircraft is restarted, the auxiliary bottom light will revert back to the default setting Auto.
  • Page 38 • The propeller blades are sharp. Handle with care. • Only use official DJI propellers. DO NOT mix propeller types. • Propellers are consumable components. Purchase additional propellers if necessary. • Make sure that the propellers and motors are installed securely before each flight.

  • Page 39: Intelligent Flight Battery

    DJI Mavic 3M User Manual Intelligent Flight Battery The Mavic 3 Intelligent Flight Battery is a 15.4V, 5000mAh battery with smart charging and discharging functionality. Battery Features 1. Battery Level Display: the battery level LEDs display the current battery level.
  • Page 40 Make sure to charge the battery fully before takeoff. 2. Batteries cannot be used in extremely low-temperature environments of lower than -10° C (14° F). 3. When in low-temperature environments, end the flight as soon as DJI Pilot 2 displays the low battery level warning.  ...
  • Page 41 Intelligent Flight Battery. Using the Charging Hub DJI Mavic 3 Battery Charging Hub (100W) is designed for use with Mavic 3 Intelligent Flight Batteries. When used with the DJI USB-C Power Adapter (100W), it can charge up to three Intelligent Flight Batteries in sequence from high to low power levels.
  • Page 42 Solid red unplug and plug in the charger) • It is recommended to use a DJI USB-C Power Adapter (100W) when using the Mavic 3 Battery Charging Hub to charge Mavic 3 Intelligent Flight Batteries. • The charging hub is only compatible with BWX260-5000-15.4 Intelligent Flight Batteries.
  • Page 43 • Fully charge the battery at least once every three months to maintain battery health. • DJI does not take any responsibility for damage caused by third-party chargers. For safety purposes, keep the batteries at a low power level in transit. This can be done by flying the aircraft outdoors until there is less than 30% charge left.
  • Page 44 DJI Mavic 3M User Manual Inserting the Intelligent Flight Battery Insert the Intelligent Flight Battery into the battery compartment of the aircraft. Make sure it is mounted securely and that the battery buckles are clicked into place. Click Removing the Intelligent Flight Battery Press the textured part of the battery buckles on the sides of the battery to remove it from the compartment.

  • Page 45: Gimbal

    Use the gimbal dial on the remote controller to control the tilt of the camera. Alternatively, enter the camera view in DJI Pilot 2. Press the screen until a circle appears and drag the circle up and down to control the tilt of the camera.

  • Page 46: Camera

    DJI Mavic 3M User Manual Camera Camera Profile DJI Mavic 3M integrates an RGB camera and four multispectral cameras that can be used to take photos and record videos simultaneously. Multispectral Camera RGB Camera The 4/3 CMOS, 20MP RGB camera has a mechanical shutter to prevent motion blur and supports rapid 0.7-second interval shooting when only the RGB camera is used.

  • Page 47: Psdk Port

    • Make sure to power off the aircraft correctly. Otherwise, the camera parameters will not be saved, and any recorded videos may be affected. DJI is not responsible for any loss caused by an image or video recorded in a way that is not machine-readable.
  • Page 48 • It is recommended to use the DJI RC Pro Enterprise remote controller to play vocals or import a vocal source for the best playback effect. It is not recommended to play single- frequency sounds such as an alarm to avoid irreversible damage to the speaker.
  • Page 49 Keep the remote controller turned on and connected to the internet when using this function. 1. Make sure that the remote controller is connected to the aircraft and the internet. 2. Go to the camera view in the DJI Pilot 2 app, tap > , select Custom Network RTK as the RTK service type and fill in the required information.

  • Page 50: Remote Controller

    Remote Controller The DJI RC Pro Enterprise remote controller features O3 Enterprise. The latest version of DJI's signature OcuSync image transmission technology works at both 2.4 and 5.8 GHz, is capable of selecting the best transmission channel automatically, and can transmit a live HD view from the camera of the aircraft at a distance of up to 15 km.
  • Page 51 DJI Mavic 3M User Manual 3. Gallery Tap to view stored images and videos. 4. Files Tap to view stored files. 5. Browser Tap to open the browser. 6. Settings Tap to enter system settings. 7. Guide Tap to read the guide with detailed information on the remote controller buttons and LEDs.
  • Page 52 DJI Mavic 3M User Manual Shortcut Settings 10:12 Notifications Sat, Mar 30 Wi-Fi Bluetooth Do not distube Record Screen Screenshot Mobile Airplane 1. Notifications Tap to view system or app notifications. 2. Recent to view and switch to recently opened apps.

  • Page 53: Remote Controller Leds And Alerts

    Remote Controller Alert The remote controller vibrates or beeps twice to indicate an error or warning. Pay attention to the prompts that appear on the touchscreen or in DJI Pilot 2. Slide down from the top and select Mute to disable alerts.

  • Page 54: Operation

    DJI Mavic 3M User Manual Operation Powering On/Off Press the power button once to check the current battery level. Press once, then press again and hold for two seconds to power the remote controller on or off. Charging the Battery Use a USB-C cable to connect the charger to the USB-C port of the remote controller.
  • Page 55 DJI Mavic 3M User Manual Controlling the Aircraft The control sticks can be operated in Mode 1, Mode 2, or Mode 3, as shown below. Mode 1 Left Stick Right Stick Forward Down Backward Left Right Turn Left Turn Right...
  • Page 56 DJI Mavic 3M User Manual Remote Controller Aircraft ( Indicates nose Remarks (Mode 2) direction) Throttle Stick: moving the left stick up or down changes the altitude of the aircraft. Push the stick up to ascend and push down to descend. The aircraft hovers in place if the stick is in the center.
  • Page 57 Refer to the Return to Home section for more information about RTH. Customizable Buttons The C1, C2, and 5D buttons are customizable. Launch DJI Pilot 2 and enter camera view. Tap > to configure the functions of these buttons. In addition, button combinations can be customized using the C1 and C2 buttons with the 5D button.

  • Page 58: Optimal Transmission Zone

    DJI Mavic 3M User Manual Combination Operation Function Back Button + Left Dial Adjust Brightness Back Button + Right Dial Adjust Volume Back Button + Record Button Record Screen Back Button + Shutter Button Screenshot Back Button + 5D Button Toggle up - Home;...

  • Page 59: Advanced Features

    Method 2: Using DJI Pilot 2 1. Power on the aircraft and the remote controller. 2. Run DJI Pilot 2 and tap Link Remote Controller to link. The status LED of the remote controller blinks blue, and the remote controller beeps.

  • Page 60: Dji Pilot 2 App

    DJI Pilot 2 App The DJI Pilot 2 app is specifically developed for enterprise users. Manual flight integrates a variety of professional features that make flying simple and intuitive. Flight task supports flight planning and autonomous operation of the aircraft, making your workflow much simpler and more efficient.
  • Page 61 After obtaining the license of the DJI SmartFarm Platform, photos and videos can be uploaded to the cloud in real time. The DJI SmartFarm Platform provides customers with farmland management, pest control, and production integration solutions to improve productivity and process management efficiency.
  • Page 62 The maintenance information of the current aircraft is displayed here. If the aircraft has DJI Care Enterprise, its validity period will also be shown. Tap to view the device information, including cycle count, flight duration, flight history, activation time, flight mileage, etc.

  • Page 63: Preflight Check

    Refer to Preflight Check and Camera View sections for more details. Preflight Check Tap Enter Camera View on the homepage of DJI Pilot 2 to enter Preflight Check. 1. View the aircraft's health information, flight mode, intelligent flight battery level, remote controller battery level, home point status, RTK status, and camera microSD card storage information.

  • Page 64: Camera View

    DJI Mavic 3M User Manual Camera View Introduction After tapping Enter Camera View on the home screen of DJI Pilot 2 and completing the Preflight Check, users will be directed to the camera view. The introduction below is based on the RGB camera view.
  • Page 65 18. Look At: after selecting a PinPoint, users can tap the Look At icon, and the camera will face the PinPoint. 19. File Upload to Cloud Status: displays the file upload status from DJI Pilot 2 to the DJI SmartFarm Platform. Tap to view the details.
  • Page 66 DJI Mavic 3M User Manual Top Bar 1. Back: tap to return to the home screen of the DJI Pilot 2 app. 2. System Status Bar: indicates the aircraft flight status and displays various warning messages. If an alert appears during flight, it will be displayed in the system status bar and continue flashing.
  • Page 67 DJI Mavic 3M User Manual Intelligent Flight Battery Settings: includes battery information, smart return- to-home, low battery warning thresholds, and number of days required for self- discharge. Gimbal Settings: only appears when RTK module is mounted. Include gimbal pitch settings, and gimbal auto calibration.
  • Page 68 Both the obstacle braking distance and the warning distance can be set in DJI Pilot 2. Follow the prompted instructions in the app to set them. The white line shows the position of the aircraft in three seconds.
  • Page 69 DJI Mavic 3M User Manual Multispectral Camera View This section mainly sets out the differences with the RGB camera view. Refer to the introduction of the Camera View section for more details. 1. Vegetation Index and Multispectral Camera Vegetation Index (VI): displays the real-time vegetation index view. NDVI, GNDVI, and NDRE index maps are supported.

  • Page 70: Map View

    If external maps in MBTiles format have been imported using DJI Pilot 2 by tapping Profile on the homepage > Map Settings > MapTiler > Custom Layer, one or more of the imported maps in the MBTiles format can be selected to add above the currently shown MapTiler map.

  • Page 71: Annotation Management

    DJI Mavic 3M User Manual 5. Map Lock: when enabled, the map cannot be rotated; when disabled, the map can be rorated freely. 6. Recenter View: tap to quickly center the remote controller location in the view. 7. GEO Zone Map Layers: tap to view all GEO Zone layers and enable or disable the GEO Zones layer display on the map.
  • Page 72 DJI Mavic 3M User Manual d. After selecting a PinPoint, the user can edit the name, color, latitude, longitude, and altitude of the PinPoint or drag the PinPoint on the map. 3. Tap > to set functions of customizable buttons of the remote controller as add PinPoint, delete the selected PinPoint, or select the previous or next PinPoint.
  • Page 73 DJI Mavic 3M User Manual 1. Tap to export all PinPoints to the local folder of the remote controller. 2. Tap to close the current panel. 3. Filter the PinPoints by color. Multiple colors can be selected, and PinPoints will be filtered by the colors selected.
  • Page 74 DJI Mavic 3M User Manual Line and Area Annotation Management Users can draw lines and areas on the map to synchronize key information about roads and land. 1. Tap to display the Edit Line view. 2. Tap to display the Edit Area view.

  • Page 75: Poi

    PinPoint. Users can also lock or adjust the gimbal tilt manually. In POI mode, if the vision systems are working normally, the aircraft will brake when an obstacle is detected, regardless of whether obstacle avoidance is set to Avoid or Brake in DJI Pilot 2.
  • Page 76 DJI Mavic 3M User Manual 4. Move the roll stick left or right to make the aircraft start to fly clockwise or counterclockwise. The more the roll stick is pushed away from the center position, the faster the aircraft will move. The yellow line in the speed bar refers to the circling speed manually controlled by the user.

  • Page 77: Flight Tasks

    DJI Mavic 3M User Manual Flight Tasks Tap on the home screen of DJI Pilot 2 to enter the flight route library, or tap the flight route icon in the camera view or in the map view to enter the flight route library. Users can view flight tasks or create a waypoint route, area route, or linear route task.
  • Page 78 4. Delete Selected Waypoints: tap to delete the selected waypoints. 5. Parameters List: edit the route name and altitude mode. Set the aircraft type as Mavic 3M. 6. Flight Route Settings: the settings are applied to the entire route, including safe takeoff altitude, ascend to start point, aircraft speed, aircraft altitude, aircraft yaw, gimbal control, waypoint type, and completion action.
  • Page 79 DJI Mavic 3M User Manual 9. Perform: tap the button and then check the settings and status of the aircraft in the Pre- flight Checklist. Tap to upload the flight route. Once the upload completes, tap the Start button to perform the current task.
  • Page 80 DJI Mavic 3M User Manual Flight Task Editing Enter the flight route library and select a created flight route for editing or viewing. 1. Tap to perform the current task. 2. Tap to enter the Flight Route Editing. The edits will be merged into the original route once saved.
  • Page 81 DJI Mavic 3M User Manual Area Route Area route has Ortho Collection and Oblique Collection, the aircraft can automatically complete the data collection for the aerial photogrammetry of the planned area along the s-shaped route according to the route parameters.
  • Page 82 DJI Mavic 3M User Manual b. The aircraft will automatically adjust the flight speed according to the number of photos required to ensure operational efficiency. Photo Number Flight Speed Fast Medium Slow c. The flight area will vary depending on the mapping area, flight altitude, and gimbal pitch.
  • Page 83 DJI Mavic 3M User Manual Real-Time Follow Real-Time Follow does not require DSM files. The aircraft vision system detects the terrain fluctuations 200 m ahead in real time during the flight. It is recommended to use this function in areas where the terrain slope is less than 75° and the lighting condition and environment are suitable for the vision system.
  • Page 84 1. Import Local File a. Collect the 2D data of the mapping area and perform a 2D reconstruction using DJI Terra by selecting Fruit Tree mode. A .tif file will be generated and can be imported to the microSD card of the remote controller.
  • Page 85 Before collecting aerial photogrammetry data, enter the aircraft settings to enable RTK, and ensure that RTK is connected and in FIX state. 1. Tap on the home screen of DJI Pilot 2 to enter the flight route library, select Create a Route or Import Route (KMZ/KML), and select to create an Area Route.
  • Page 86 DJI Mavic 3M User Manual 4. Power off the aircraft after the task is completed. Remove the microSD card from the aircraft, and connect it to the computer to check the taken photos and the generated files. • When using Area Route and Linear Route, the default camera focus mode is MF infinity, and the distortion correction is disabled.
  • Page 87 DJI Mavic 3M User Manual The route angle can be adjusted, and the starting and ending positions of the route will be adjusted accordingly. Note: the Course Angle estimated time of the task varies for different course angles. By adjusting the course angle, the task with the shortest estimated time can be planned to improve the operation efficiency.
  • Page 88 DJI Mavic 3M User Manual Oblique Collection and Smart Oblique tasks also support the following specifications: Specifications Description Adjusts the camera pitch angle when capturing oblique photos. The default angle is -45°. When the altitude difference of the buildings in the mapping area increases, it is recommended to...
  • Page 89 DJI Mavic 3M User Manual Data Storage Photo File Refer to this list to check the descriptions for the photo file field. Field Field Description ModifyDate Time photo was modified CreateDate Time photo was created Make Manufacturer Model Product model...
  • Page 90 1 - Dewarped DewarpData Camera parameters for dewarping (the calibration file must be imported and calibrated in DJI Terra for the data to be generated): Parameter sequence - fx, fy, cx, cy, k1, k2, p1, p2, k3 fx, fy - Calibrated focal length (unit: pixel)
  • Page 91 DJI Mavic 3M User Manual SensorGainAdjustment Gain compensation coefficient relative to standard NIR module SensorIndex Green: 1, Red: 2, RE: 3, NIR: 4 SunSensor Solar irradiance value before compensation by built-in algorithm SunSensorExposureTime Exposure time of the spectral sunlight sensor, unit: second...
  • Page 92 DJI Mavic 3M User Manual Image Log File Open an image log file with the extension .MRK to view the data below. 1. Photo series number: the series number of the image log file stored in this folder. 2. GPS TOW: when the photo was taken expressed in GPS TOW.
  • Page 93 DJI Mavic 3M User Manual 7. Longitude after compensation. 8. Latitude after compensation. 9. Ellipsoid height. 10. Positioning standard deviation in the north direction. 11. Positioning standard deviation in the east direction. 12. Positioning standard deviation in the elevation direction.

  • Page 94: Health Management System (Hms)

    2. DJI Maintenance Program: users can view historical flight data and refer to the maintenance manual to determine if maintenance is required. 3. DJI Care: relevant information can be viewed if the device is bound to DJI Care. 4. Firmware Update: tap to enter the Firmware Update page.

  • Page 95: Appendix

    Precision Positioning System); ±0.1 m (with RTK) Operating Temperature -10° to 40° C (14° to 104° F) Range Internal Storage Motor Model 2008 Propeller Model 9453E 8658F (Low-Noise Propellers must be used in countries and regions with C2 certification)   © 2023 DJI All Rights Reserved.
  • Page 96 DJI Mavic 3M User Manual Spectral Sunlight Sensor Built into the aircraft Gimbal Stabilization System 3-axis (tilt, roll, pan) Mechanical Range Tilt: -135° to 45° Roll: -45° to 45° Pan: -27° to 27° Controllable Range Tilt: -90° to 35° Pan: not controllable Max Control Speed (tilt) 100°/s...
  • Page 97 DJI Mavic 3M User Manual Max Image Size 2592×1944 Photo Shooting Mode Single shot: 5 MP Timed: 5 MP TIFF: 2/3/5/7/10/15/20/30/60 s Video Encoding and H.264 Resolution FHD: 1920×1080@30fps Video content: NDVI/GNDVI/NDRE Video Bitrate Stream 60Mbps Photo Format TIFF Video Format MP4 (MPEG-4 AVC/H.264)
  • Page 98 Recommended to be charged with the included DJI USB-C Power Adapter (100W) or USB charger at 12 V or 15 V Charging Time Approx. 1 hour 30 minutes (with the included DJI USB-C Power Adapter (100W) only charging the remote controller or a USB charger at 15 V) Approx.
  • Page 99 DJI Mavic 3M User Manual Video Transmission DJI O3 Enterprise Transmission System Max Transmission Distance (unobstructed, 15 km (FCC), 8 km (CE/SRRC/MIC) free of interference) Operating Frequency 2.400-2.4835 GHz, 5.725-5.850 GHz Transmitter Power (EIRP) 2.4 GHz: <33 dBm (FCC), <20 dBm (CE/SRRC/MIC) 5.8 GHz: <33 dBm (FCC), <14 dBm (CE), <23 dBm (SRRC)
  • Page 100 (with no payload) under each standard. During your flight, please pay attention to RTH reminders in the DJI Pilot 2 app. [4] Data tested under different standards in unobstructed environments with typical interference.

  • Page 101: Firmware Update

    25%, and the remote controller is connected to the internet. 2. Run DJI Pilot 2. A prompt will appear on the homepage if new firmware is available. Tap to enter the Firmware Update view.

  • Page 102: Post-Flight Checklist

    • Make sure that the battery levels of the aircraft and remote controller are higher than 25% before updating. • Make sure all DJI devices are connected properly to the computer during an update. • During the update process, it is normal for the gimbal to go limp, the aircraft status indicators to blink, and the aircraft to reboot.

  • Page 103: Troubleshooting Procedures

    Check if the Intelligent Flight battery and the remote controller are activated by charging. If the problems persist, contact DJI support. 4. Power-on and start-up problems Check if the battery has power. If yes, contact DJI support if it cannot be started normally. 5. SW update issues Follow the instructions in the user manual to update the firmware.

  • Page 104: Risk And Warnings

    Contact DJI support. Risk and Warnings When the aircraft detects a risk after powering on, there will be a warning prompt on DJI Fly. Pay attention to the list of situations below. 1. If the location is not suitable for takeoff.
  • Page 105 DJI Mavic 3M User Manual MTOM Statement The MTOM of DJI Mavic 3M EU (Model M3M-EU), including 1 battery, a microSD card, is not larger than 1050 g to comply with C2 requirement. Users must follow the instructions below to comply with the MTOM C2 requirements.
  • Page 106 UGZ. Neither AMSL altitude nor the AGL height is supported by DJI Mavic 3E/3T. The height H appears in the DJI Fly app camera view, which is the height from the aircraft takeoff point to the aircraft. The height above the takeoff point may be used as an approximation but may differ more or less from the given altitude/height for a specific UGZ.
  • Page 107 3. User can apply on the DJI official website after manual approval Authorization Zones Appear blue in the DJI app. Users will be prompted with a warning, and flight is limited by default. UA cannot fly or takeoff in these zones unless authorized. Authorization Zones may be unlocked by authorized users using a DJI verified account.
  • Page 108 10 m Limit maximum speed 1. UA can take off and fly into these zones in specific height with a warning message 2. User can apply for permission on the DJI official website after manual approval Ground Enhanced Warning Zones A warning message will prompt users when the drone reaches the edge of the zone.

  • Page 109: Far Remote Id Compliance Information

    • The aircraft monitors the Remote ID system functionality from pre-flight to shut down. If the Remote ID system malfunctions or has a failure, an alarm will be displayed in a DJI flight control app such as DJI Pilot. •...
  • Page 110 This content is subject to change. Download the latest version from https://ag.dji.com/mavic-3-m/downloads If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. DJI and MAVIC are trademarks of DJI. Copyright © 2023 DJI All Rights Reserved.

This manual is also suitable for:

Mavic 3m eu

Table of Contents

Save PDF