Network Settings - D-Link RangeBooster G WBR-2310 User Manual

Section 3 - Configuration
This section will allow you to change the local network settings of the router and to configure the DHCP settings.
IP Address:
Enter the IP address of the router. The default
IP address is 192.168.0.1.
If you change the IP address, once you click
Apply, you will need to enter the new IP address
in your browser to get back into the configuration
utility.
Subnet Mask:
Enter the Subnet Mask.The default subnet mask
is 255.255.255.0.
Local Domain:
Enter the Domain name (Optional).
Enable DNS Relay:
Check the box to transfer the DNS server
information from your ISP to your computers. If
unchecked, your computers will use the router
for a DNS server.
Refer to the next page for DHCP information.
D-Link WBR-2310 User Manual

Network Settings

26