Adjusting Picture Settings - Haier LT26K3A Instruction Manual

ADJUSTING PICTURE SETTINGS

Changing the Picture Setting
1. Press MENU button.
2. Press button to select Picture menu,
3. Press button to select the item requires adjusting.
4. Press button to adjust the selection item.
5. When you are satisfied with your choice, press the EXIT
button to return to normal viewing or press MENU button to
return to the previous menu.
Contrast
This will adjust the intensity of bright parts in the picture but keep
the dark parts unchanged.
Brightness
This will adjust the light output of the complete picture, which will
mainly affect the darker areas of the picture.
Colour
This will adjust the saturation level of the colours to suit your personal
preference.
Sharpness
This will adjust the sharpness of fine details in the picture.
Tint
Allows you to select the colour mix (Tint) of the picture.
Note: The Tint function is only available in NTSC mode.
Mode
This will select the picture mode. Select Standard/Mild/User/Vivid according to the program.
You can quickly select the desired mode by P .MODE button on the remote control.
Colour temperature
This will increase or decrease Warm (red) and Cool (blue) colours to suit
personal preferences.
Select Cool to give the white colour a blue tint, Normal to give the white
colour a neutral tint, Warm to give the white colour a red tint.
Noise Reduction
Automatically filters out and reduces the image noise and improves picture
quality when receiving weak video signals.
Select Off/Low/Standard/High according to the image noise.
Reset
To recover to the default value.
press button to enter.
Menu
OK