Sharp MS702 - MiniDisc Recorder Operation Manual page 36

PLAY MODE
To cancel the auto-play
function
When a MiniDisc is inserted, the power will
be turned on and playback will begin auto-
matically. You can cancel automatic
playback.
1
While in the stop mode ...
Hold down the PLAY MODE button or
the MODE/INS button until "SET UP"
appears.
When you release the button, "BEEP
1 (BEEP ON)" or "BEEP 0 (BEEP
5 4
OFF)" will appear.
2
Press the or button until "auto
PL (A-PLAY ON)" appears.
3
Press the PLAY MODE button or the
MODE/INS button.
"PL off (A-PLAY OFF)" will appear,
and the auto-play function will be
canceled.
To restore the auto-play function,
select "auto PL (A-PLAY ON)".
4
Press the /:OFF button.
The normal display will reappear.
To cancel the auto power
save function
MODE/INS
Power consumption can be reduced by
changing the anti shock memory storage
time. The auto power save function can be
canceled for maximum
memory.
:OFF
1
While in the stop mode ...
Hold down the PLAY MODE button or
the MODE/INS button until "SET UP"
appears.
When you release the button, "BEEP
1 (BEEP ON)" or "BEEP 0 (BEEP
5
OFF)" will appear.
2
Press the
"auto PS (AUTO Psave)" appears.
3
Press the PLAY MODE button or the
MODE/INS button.
"PS off (Psave off)" will appear, and
the auto power save function will be
canceled.
To restore the auto power save func-
tion, select "auto PS (AUTO Psave)".
4
Press the /:OFF button.
The normal display will reappear.
About the sound skip guard memory:
During playback, approximately 10 seconds
of information is stored in the semiconductor
memory. Therefore, even when the pickup
cannot read information for a second or two
due to an external shock, the sound will con-
tinue without interruption because the infor-
mation stored in memory is used.
About the auto power save function:
This is a function used to save power when
using the unit with the rechargeable battery or
the alkaline batteries. While in the auto power
save mode, 5 - 10 seconds of sound informa-
tion is stored in memory. When the unit is
used in places exposed to excessive vibra-
tion, cancel the auto power save function.
When the auto power save function is dis-
abled, 10 seconds of sound information is
always stored in memory. (When the AC
adaptor or a car adaptor is used, the informa-
tion storage time is always 10 seconds,
regardless of the auto power save mode.)
35
anti shock
4
or button until the
MD-MS702